Results 1 to 4 of 4
  1. #1

    2000 GTX Rave crankcase pressure hose location

    Well I changed my oil filter today and as I was pulling it out did not notice the hose was zip tied to another hose. Before I could stop I pulled enough where at least one end of the other hose came off. I say at least one end because one end did come off and the other "appears" to be on but not sure how far on. The end that came off looks to be where the pressure hose from crankcase attaches to the Rave solenoid. I followed the hose towards the other end and it disappears under the motor on the left side of the hull. I could not see where it connects to the crankcase and was wondering if someone can pass along where that is and how to check it (pictures even better).

    Thanks


  2. #2
    bump. just trying to get an answer to this as it is not really shown in the shop manual.

  3. #3
    I believe I found it. The thing that made it tricky was that the hose is secured midway to the crankcase to the point where the other end does not move when pulling the other end (the end that came off the Rave solenoid). So I used an inspection camera to trace the hose and it appears to enter the crankcase on the bottom back left of the motor (when looking at it from the back).

  4. #4
    SURFnTURF's Avatar
    Join Date
    May 2007
    Location
    Australia
    Posts
    878
    +1
    11
    At the rear behind the starter
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	PHOTO928.jpg 
Views:	34 
Size:	97.5 KB 
ID:	305842  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 9
    Last Post: 10-12-2010, 10:28 PM
  2. FX140 Pressure Relief Valve Hose Locations
    By steelroe in forum Yamaha PWC Performance (4-stroke)
    Replies: 0
    Last Post: 05-06-2010, 06:04 PM
  3. FX140 Pressure Relief Valve Hose Locations
    By steelroe in forum Yamaha PWC Performance (4-stroke)
    Replies: 0
    Last Post: 05-06-2010, 05:57 PM
  4. 2000 GTX 951cc
    By freeze in forum 2-Stroke Performance
    Replies: 4
    Last Post: 08-16-2007, 05:59 AM
  5. oil pressure jet location?
    By beachboy66 in forum 4-Tec Performance
    Replies: 4
    Last Post: 07-21-2006, 04:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •