Results 1 to 6 of 6
  1. #1

    VXR Lube intermediate housing

    I have my grease gun and marine grease. I know to slowly pump about 10 grams in. Where is the nozzle that I put the marine grease in?


  2. #2
    bryantjopplin's Avatar
    Join Date
    Jun 2012
    Location
    Shreveport, LA
    Posts
    2,436
    +1
    163
    Quote Originally Posted by zugzug View Post
    I have my grease gun and marine grease. I know to slowly pump about 10 grams in. Where is the nozzle that I put the marine grease in?
    Right under the plastic housing for the fuse box on the circular steel below it. It is hard to see and you need a flex line on your grease gun.

  3. #3
    Does it snap/screw in? What does it look like?

  4. #4
    bryantjopplin's Avatar
    Join Date
    Jun 2012
    Location
    Shreveport, LA
    Posts
    2,436
    +1
    163
    It's just a grease zerk or alamite, which ever you prefer to call it. It has a rubber cap on. Looks just like a ball joint grease fitting. Go slow with the pump. Someone said that you can have it running while pumping the grease and it should work better as it is transferred through out

  5. #5
    Some say it is not even worth lubing. I haven't lubed mine since the end of the 2011 season, and have over 200 hours on it. If you do lube it, don't use to much. 10 ml is not a a lot, and if you put in two much, you wil blow out the seal.

  6. #6
    bryantjopplin's Avatar
    Join Date
    Jun 2012
    Location
    Shreveport, LA
    Posts
    2,436
    +1
    163
    Quote Originally Posted by dukenyc View Post
    Some say it is not even worth lubing. I haven't lubed mine since the end of the 2011 season, and have over 200 hours on it. If you do lube it, don't use to much. 10 ml is not a a lot, and if you put in two much, you wil blow out the seal.
    How can you tell if it is blown or something else without taking it apart? I think I might have put to much in.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2015 VXR Intermediate Housing
    By Smilin' Dominator in forum Yamaha How To & FAQs
    Replies: 2
    Last Post: 05-24-2016, 09:22 AM
  2. intermediate housing lube
    By jaybro in forum Yamaha PWC Performance (4-stroke)
    Replies: 25
    Last Post: 08-18-2011, 09:04 AM
  3. intermediate housing
    By tubetent in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 02-25-2009, 10:29 AM
  4. GPR Intermediate housing question
    By mrbtd in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 04-10-2008, 01:04 PM
  5. Intermediate Housing
    By JKR1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-30-2006, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •