Results 1 to 6 of 6
  1. #1

    polaris pro 1200 mods?? no low end help

    Im looking for alot more low end.. everything on it it stock. Woundering what I can do to it to make it rip.. top speed dont matter too much.. I dont wanna bore it out or mess with new carbs.. basically whats out there for these.. and where can I find them. I dunno if its normal for these cuz not many ppl got them but stock are they just pigs on low end till about 15 20 mph or is it just mine.. its screaming and rpms and winding out but just dont seem like its moving till it speeds up then hang on it takes off. Any help would be sweet. Impellers, jet pumps, intake grates, tripples?? Whats the goods and bads on these or what else is there


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,593
    +1
    1,275
    Check or redo the sealant around the jet pump base, water intake and the ride plate.

    Air leaks will reduce thrust during hard acceleration from low speeds.

  3. #3
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    What impeller is in it now? If its a Polaris 202, ditch it for a 707 or a Skat style prop. You will see a HUGE difference in take off.

  4. #4
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400
    you didn't say what year.get a set of carbon tech petals,318lt.a skat style prop something like a 17/23 from a genesis or virage txi.if its an 00 model get a jetworks valve for the stinger.the gas tank is about 3" offset to one side.without triple pipes the tank should be centered.or swap a slx tank and center it and gain 2.3 extra gallons.set of sponsons really improve the carving ability of the hull.chasing mph on this hull is a waste of time unless you go triple pipes,porting or both.the mph becomes a bonus to improving the hp and breathing of the motor.

  5. #5
    BlueFishCrisis's Avatar
    Join Date
    Aug 2011
    Location
    Medina, Ohio, United States
    Posts
    4,988
    +1
    140
    Quote Originally Posted by K447 View Post
    Check or redo the sealant around the jet pump base, water intake and the ride plate.

    Air leaks will reduce thrust during hard acceleration from low speeds.
    +1 - If it wont take off out of the hole, something isn't right. Make sure everything is very well sealed first.....

  6. #6
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400
    or the prop is damaged or the stator is.my pro had a quarter size chunk missing when i bought it from the s/s stator

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2000 polaris pro 1200 no spark now no crank
    By lzboy308 in forum Polaris Tech Tips and Info
    Replies: 9
    Last Post: 06-11-2015, 06:20 PM
  2. 2000 polaris pro 1200 new cdi , no power, cdi
    By Joey_lobes in forum Polaris PWC Performance
    Replies: 2
    Last Post: 07-23-2014, 09:31 PM
  3. Polaris Pro 1200 mods
    By polaris pro 1200 mods in forum Polaris PWC Performance
    Replies: 27
    Last Post: 05-30-2013, 07:04 PM
  4. Polaris pro 1200 problem need help!!!
    By polaris pro 1200 mods in forum Polaris PWC Performance
    Replies: 7
    Last Post: 05-30-2013, 06:16 PM
  5. 2000 Polaris pro 1200 Issue no idea???
    By rdizz81 in forum Polaris Open Discussion
    Replies: 6
    Last Post: 05-17-2010, 08:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •