Results 1 to 6 of 6
  1. #1

    Join Date
    Apr 2013
    Location
    Ottawa,Belleville Ontario Canada
    Posts
    83
    +1
    2

    Can rossier intake manifold be drilled and tapped for oil injectors ?

    Question is can rossier intake manifold be drilled and tapped for oil injectors ? Any links on this?


  2. #2
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    They did it for me when i ordered mine years back, but yes , do it

  3. #3

    Join Date
    Apr 2013
    Location
    Ottawa,Belleville Ontario Canada
    Posts
    83
    +1
    2
    I hust checked my stock intake looks like they are pressed in the stock manifold ! Do people use aftermarket oil injectors ?

  4. #4
    People almost always go pre-mix after adding those type of performance parts.

  5. #5

    Join Date
    Apr 2013
    Location
    Ottawa,Belleville Ontario Canada
    Posts
    83
    +1
    2
    Hey guys thanks I used a set of pliers and it just came out. I will drill the manifolds and install the injectors. I checked them both with composed air they work good .

  6. #6

    Join Date
    Apr 2013
    Location
    Ottawa,Belleville Ontario Canada
    Posts
    83
    +1
    2
    I am gonna drill the rossier and press them in hope this works.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Older exhaust manifold drilled and tapped the new way picture
    By skigolfnut in forum 4-Tec Performance
    Replies: 30
    Last Post: 07-14-2015, 01:24 PM
  2. what size drill and tap for wideband
    By Branden in forum 4-Tec Performance
    Replies: 27
    Last Post: 04-23-2015, 08:55 PM
  3. SOLD Exhaust manifold drilled and tapped for O2 sensor
    By rangermtb5 in forum Sea Doo Classifieds
    Replies: 12
    Last Post: 01-19-2012, 12:35 PM
  4. FS 4tec exhaust manifold, drilled and tapped for o2 sensor
    By vspec1 in forum Sea Doo Classifieds
    Replies: 8
    Last Post: 10-12-2011, 09:15 PM
  5. drill and tapped intake manifold for BOV without removing the manifold
    By peterj59 in forum Yamaha PWC Performance (4-stroke)
    Replies: 16
    Last Post: 09-14-2011, 05:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •