Results 1 to 9 of 9
  1. #1

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213

    Exclamation Change the cooling water , totally drain

    Kindly , i need help , what is the right way to empty

    out the cooling water ( totally) from my rxp 06 and fill it

    back with new cooling water and where do i fill the

    water ( is't from the white tank only ) , please reply me asap

    Thanx 4 allllllllllllllllllllllllllllllllllllllllllllll


  2. #2
    i never change mine if u want 2 drain it on the back of ur ride plate in the center theres a allen set screw take it out & take the cap off the plastic over flow bottle replace the coolent with a 50/50 mix of water & antifreezi

  3. #3

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by yellow jacket View Post
    i never change mine if u want 2 drain it on the back of ur ride plate in the center theres a allen set screw take it out & take the cap off the plastic over flow bottle replace the coolent with a 50/50 mix of water & antifreezi
    wooooooow, thanx , then where do i fill the new water

    is't from the white plastic tank under the seat , please reply ,

    thanx

  4. #4
    Quote Originally Posted by LAB69 View Post
    wooooooow, thanx , then where do i fill the new water

    is't from the white plastic tank under the seat , please reply ,

    thanx
    yes fill it start it 4 a few sec then check the level again & also 2 b safe check it after 5 min of rideing

  5. #5

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by yellow jacket View Post
    yes fill it start it 4 a few sec then check the level again & also 2 b safe check it after 5 min of rideing
    WELLDONE,,,,,,,THANX

  6. #6
    HOSS's Avatar
    Join Date
    Aug 2005
    Location
    Kenner, LA
    Posts
    4,759
    +1
    29
    Don`t pop the cap on the puke tank. This will create a vacuum and suck it out of the block too! It`ll take at least an hour to drain but all will come out!

    Don`t use tap water. Use distilled. Distilled water is "soft" water and tap water is hard water which wears aluminum. Seen too many riders make this mistake on dirt bikes. Eats the pump housing.

  7. #7
    Dr Len's Avatar
    Join Date
    Jan 2006
    Location
    New Jersey Attitude Capital of the World
    Posts
    1,170
    Hey Hoss What do you think of the product Water Wetter You think it works ?

  8. #8
    HOSS's Avatar
    Join Date
    Aug 2005
    Location
    Kenner, LA
    Posts
    4,759
    +1
    29
    Everyone I know using it swears by it. I haven`t ever tried it and doubt I ever will.

  9. #9
    lextoy's Avatar
    Join Date
    Jan 2007
    Location
    Brigantine, NJ
    Posts
    1,883
    +1
    14
    i have heard to leave the drain plug out while you refill the system, until you see antifreeze coming out the drain, then put the plug back in (with the proper loctite/sealant) and finish filling the system.
    of course afte rthe first 15 minutes of riding check the overflow level and add more if necessary.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 8
    Last Post: 05-29-2014, 06:24 AM
  2. Replies: 28
    Last Post: 09-07-2013, 09:40 PM
  3. 2002 XP, where does the "cooling system drain hose" go.
    By thetolleyman in forum 2-Stroke Performance
    Replies: 6
    Last Post: 07-05-2013, 04:20 PM
  4. Another reason to change some of the cooling hoses on the 300x...
    By jetdave56 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 16
    Last Post: 11-01-2012, 05:33 PM
  5. Replies: 1
    Last Post: 10-09-2012, 07:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •