Thread: solas dynafly 15/22
07-04-2013, 09:10 PM #1
solas dynafly 15/22
Does anybody know the measurement of the trailing edge to the bench. In other words. If the prop is sitting flat on the bench how far is the trailing edge of the blades to the bench. I don't have a prop gauge and jyst got a ysed 15/22 and nesd a starting point for pitching.
07-04-2013, 10:28 PM #2
What you're gonna find out about the Solas' is that all three blades could be different..having said that, I would send it to Jim's Performance and let him pitch to the rpm's you are trying to reach. I have pitched a hundred props over the last 20 years and I am done with it. Jim does an amazing job with his bends..he is as good as, if not better than other Pro's that we have used over the years..best $40-$50 you can spend IMO. It will be done correctly and pitched perfect.
07-04-2013, 10:57 PM #3
Mine is 11.5mm to the tip of the blade. It's a trued 15/22 & one of the tall root angle props, not a repitched 13/22r or 14/21.
07-05-2013, 06:06 AM #4
Thanks mjh3ides. That's exactly what I was looking for.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jetdave56 in forum Yamaha PWC Performance (2-stroke)Replies: 11Last Post: 03-27-2009, 12:40 PM
By zpeters in forum Yamaha ClassifiedsReplies: 0Last Post: 03-06-2009, 05:00 PM
By XRIDER in forum Yamaha ClassifiedsReplies: 1Last Post: 12-03-2008, 08:33 PM
By rapidacceleration in forum Yamaha ClassifiedsReplies: 8Last Post: 09-13-2008, 03:29 PM
By XRIDER in forum Yamaha ClassifiedsReplies: 10Last Post: 07-30-2008, 09:40 AM