Thread: oil pump blockoff compatibility?
07-22-2013, 02:34 PM #1
oil pump blockoff compatibility?
so i ordered a wsm block off from ebay for my GPR, but the one i got is a different P/N than the one spec'd by wsm for my ski...i understand that these things fit a wide variety of makes/models, however the one i received is spec'd for a kawa 900zxi on wsm's website.
it may be the same plate for both, but it appears that the bolts supplied with the kits are different...can't find any posts on the subject and don't want to pull the pipe and get 'stuck' waiting for another block off plate...
011-206 900zxi kawa is the one i received, but was sold as a block off for a gpr1200
011-216 yama 1100/1200 appears to have shorter bolts supplied, perhaps the same plate though?
thanks in advance...
07-22-2013, 08:00 PM #2
Plate looks pretty close to the same. IF the only problem is the bolts size, but holes in plate, plate, gasket, etc are all the same, use the bolts that came out of the oil pump. As long as the hole is covered correctly, it should work. May want to use some sealant as well just to be on the safe side..
08-06-2013, 09:05 PM #3
08-06-2013, 11:04 PM #4
Pretty sure the one I used on my gpr said Kawasaki too
08-06-2013, 11:09 PM #5
- Join Date
- Jul 2008
- Chesterfield Virginia USA ~ On the James River~
08-18-2013, 09:50 PM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By UFPD1881 in forum Yamaha Open DiscussionReplies: 2Last Post: 07-12-2012, 05:56 AM
By Brandonc93 in forum Polaris How To & FAQsReplies: 2Last Post: 06-21-2011, 11:22 PM
By pimpdaddy1787 in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 07-27-2010, 08:41 PM
By blu4ce in forum Yamaha PWC Performance (2-stroke)Replies: 14Last Post: 07-25-2008, 11:58 AM
By hotrod_sxty8 in forum 2-Stroke PerformanceReplies: 2Last Post: 05-15-2007, 05:01 PM