07-23-2013, 09:48 AM #1
- Join Date
- Jul 2013
How to fix the display on a 1995 polaris slt 750
it doesnt turn on. i looked in the black electrical box and there is only one fuse? is that correct but how to i check to see if i need a new one or if this one still works?
07-23-2013, 10:29 AM #2
There is only one fuse, a 1/4 amp. Use a meter to check if it is good. Then, remove the MFD, unplug the harness, and see if you have 12v at the connector by check DC voltage on the black and red/purple wires/terminals. If that checks out, then it is likely bad. If no power, time to trace the wires back and find the fault....
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jasonmd13 in forum Polaris Open DiscussionReplies: 31Last Post: 04-14-2013, 05:45 PM
By cubsfan2516 in forum Polaris ClassifiedsReplies: 34Last Post: 04-11-2013, 06:15 PM
By jasonmd13 in forum Polaris How To & FAQsReplies: 16Last Post: 03-25-2013, 08:41 PM
By Daveb in forum Polaris Open DiscussionReplies: 55Last Post: 07-09-2009, 10:24 AM
By 750slt in forum Polaris Open DiscussionReplies: 15Last Post: 06-09-2009, 11:31 PM