Results 1 to 4 of 4
  1. #1
    DJKINN13's Avatar
    Join Date
    Jul 2011
    Location
    Winchester Va.
    Posts
    6

    broken torx head bolts?

    Can any one tell me if they ever had any torx bolts break out of ride plate on2011 rxtx260? I've had two break since new
    Riva stage 1 78 hrs on ski just checking around to see if any one has ever seen this I am total stumped .....;;its left me over heated twice will out on ski with no antifreeze, dealership fixed first time 2nd was yesterday and Dilled bolt out my self. Different bolts each time,thinking may be bad design in the pump mount to ride plate that is no longer on the 2012&13?


  2. #2
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    if they cant stop the leak, the dealer should replace the plate, if still under warranty

  3. #3
    imp0ster's Avatar
    Join Date
    Dec 2011
    Location
    Palm Harbor, FL
    Posts
    5,037
    +1
    672
    If you overheated you just lowered the life of the head gasket. Twice, I'd have them replace it for good measure

  4. #4
    DJKINN13's Avatar
    Join Date
    Jul 2011
    Location
    Winchester Va.
    Posts
    6
    Thanks for the reply guys, my shop let me try harder bolts first since they can't get it in till late august and time is short up here in va.plus if doesn't work I'll put torx back in and see if they can get me a new rideplate,as for the gasket I'll do that over winter when I go to do valvetrain upgrade, grade 12 bolts with stock washers lock tite covered with silicone onheads? one more year on warranty so if it work i guess I'll leave it and go on thanks again

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Uh oh, stripped E-14 torx main bolt head on case bottom...
    By Ski Hacks MG in forum 4-Tec Performance
    Replies: 17
    Last Post: 04-29-2013, 05:46 PM
  2. Broken head bolts sltx 1050
    By midwest in forum Polaris Open Discussion
    Replies: 6
    Last Post: 07-07-2012, 09:07 PM
  3. WTB - Parts Torx flat head bolts for my MSX 140
    By locito007 in forum Polaris Classifieds
    Replies: 1
    Last Post: 04-12-2012, 01:40 AM
  4. slt 700 broken head bolts
    By electricgeoff in forum Polaris Open Discussion
    Replies: 1
    Last Post: 07-28-2009, 12:10 AM
  5. broken head bolts
    By kevan TX in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 05-06-2008, 06:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •