Results 1 to 7 of 7
  1. #1

    SeaDoo XP DI 2003......some Questions

    Hello,

    1.) What is the normal RPM ? is 7060 ok ? Ski is 100% Stock

    2.) The battery is even charged while driving.... what must be the currect voltage?

    Best regards


  2. #2
    7060 rpm is good. Mine turns 6980. Battery does get charged while running. running u want the voltage around 13.5 to 13.8.

  3. #3
    my Voltage while running is 12.3 What can here fault ? With my CanDoo...I dont see an Error....

  4. #4
    It is most likely the rectifier/regulator is bad. They are perhaps the #1 failure item on a DI. Replace it and check running voltage again. The MPEM will not show a fault unless the battery voltage drops below 12 volts or so.

  5. #5

    Join Date
    Aug 2012
    Location
    Garland, Tx
    Posts
    256
    +1
    12
    6850-6950 is normal, 7060 is probably ok, as long as your not hitting the rev limiter.

    rectifier.

  6. #6
    Ok, Rev Limiter is at what RPM ?

  7. #7

    Join Date
    Aug 2012
    Location
    Garland, Tx
    Posts
    256
    +1
    12
    around 7100, but not completely sure..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 2003 Seadoo XP-DI
    By Jetman150 in forum Sea Doo 2 Stroke Skis
    Replies: 1
    Last Post: 04-27-2014, 06:40 PM
  2. SeaDoo XP Di (2003) Steering ???
    By RXP-X 2011 in forum 2-Stroke Performance
    Replies: 0
    Last Post: 08-06-2013, 03:33 AM
  3. 2003 Seadoo XP DI
    By cjg2283 in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 06-07-2013, 11:40 PM
  4. 2003 Seadoo XP DI 120hrs
    By himal2tin in forum 2-Stroke Performance
    Replies: 3
    Last Post: 09-22-2010, 04:03 PM
  5. FS 2003 Seadoo XP DI
    By aha in forum Sea Doo 2 Stroke Skis
    Replies: 0
    Last Post: 09-10-2010, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •