Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1
    GGG's Avatar
    Join Date
    Sep 2009
    Location
    Jersey Shore
    Posts
    2,830
    +1
    258

    Whooped a 2013 px today

    So maybe someone can explain to be why my 2005 RXP with a solas impeller and the intake hose simply removed from the charger pulled away from a brand new rxpx 260 today. granted the guy had 100 pounds on me but still......


  2. #2
    RXP 260 X Short Course Veteran RXP244's Avatar
    Join Date
    May 2007
    Location
    Auckland, New Zealand, New Zealand
    Posts
    1,244
    +1
    104
    Quote Originally Posted by GGG View Post
    So maybe someone can explain to be why my 2005 RXP with a solas impeller and the intake hose simply removed from the charger pulled away from a brand new rxpx 260 today. granted the guy had 100 pounds on me but still......
    The new 260 is limited in speed, limited in boost and limited in rpm. Yours is not. Yes, maybe the new boat has 260hp but it still only goes the same speed they have all gone from 2004. The old boats were faster. Now stick it through a few buoys and then you will see the difference.

  3. #3
    GGG's Avatar
    Join Date
    Sep 2009
    Location
    Jersey Shore
    Posts
    2,830
    +1
    258
    Yeah but could I really be doing 70? and trust me I know all about it's turning abilities. Held on with every ounce of strength I had. Its a soft turn at first and then cuts REAL hard. Funny part was, it was a dead even race at first, probably because I was sucking in hot air from the exhaust but once I gained an extra 300 RPM I was just walking away

  4. #4
    RXP 260 X Short Course Veteran RXP244's Avatar
    Join Date
    May 2007
    Location
    Auckland, New Zealand, New Zealand
    Posts
    1,244
    +1
    104
    70? Easily. My bone stock 05 215 RXP did 69.4mph. My bone stock 2013 RXP260X does 69.4. And its an RS model, so its speed is higher than the non export model. Alledgedly.

  5. #5
    Maybe he was still in the 10hr break in period??

  6. #6
    GGG's Avatar
    Join Date
    Sep 2009
    Location
    Jersey Shore
    Posts
    2,830
    +1
    258
    no hes my friends dad I'm pretty sure he went through the 10 hours in the first week. I didn't think a stock rxp would be that fast. This was gonna be a beater but maybe I should put all my Polaris parts on it and se what happens ( complete 255 setup, 4 inch intake, gutted 08 waterbox, and riva ecu ) I'm gonna need a better intake grate though cause he was murdering me in the chop

  7. #7
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Were you wearing a Santa hat when you raced him?

  8. +1 by:


  9. #8
    GGG's Avatar
    Join Date
    Sep 2009
    Location
    Jersey Shore
    Posts
    2,830
    +1
    258
    No but a had my board shorts around my knees to give him a good view as i motored past. My favorite part is how i only beat him because i took the intake hose off like a dirt bag

  10. #9
    imp0ster's Avatar
    Join Date
    Dec 2011
    Location
    Palm Harbor, FL
    Posts
    5,037
    +1
    672
    Try it with an S3 Tx in chop I had one monster me the other weekend in 2ft chop. Kinda pissed me off lol

  11. +1 by:


  12. #10
    GGG's Avatar
    Join Date
    Sep 2009
    Location
    Jersey Shore
    Posts
    2,830
    +1
    258
    Im wondering how fast I can get it with those mods. It did 80 in my polaris I would assume pretty close to that

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2013 PX grinding noise no propulsion
    By Redbo in forum 4-Tec Performance
    Replies: 3
    Last Post: 12-26-2015, 04:34 PM
  2. FS - Parts 2013 PX intercooler 19 hours fresh water only like new
    By dpracing in forum Sea Doo Classifieds
    Replies: 7
    Last Post: 04-10-2014, 04:38 PM
  3. 25 hours on 2013 PX and slip is at 4 pounds.......
    By dpracing in forum 4-Tec Performance
    Replies: 13
    Last Post: 10-20-2013, 08:55 PM
  4. Damn fuel pressure on my 2013 PX................
    By dpracing in forum 4-Tec Performance
    Replies: 24
    Last Post: 09-16-2013, 12:41 PM
  5. Replies: 11
    Last Post: 08-19-2013, 10:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •