Thread: Hey RXP Steve, check it out!
03-09-2007, 01:37 PM #1
Hey RXP Steve, check it out!
When I saw your post on your home made catch can I thought it was a good idea. Since I have two RXP's to mod I have to find ways to be cheap, but still make sure the part works. Your catch can was a good idea and it will do exactly what the Jaz catch does. So for a lot cheaper I decided to make 2 of them for my RXP's I did change it a bit I ordered 2 K&N filters from the BOV's and adapted it to fit. Anyway thanks and here is a pic. Just gonna get longer hose to place it in a good spot.
03-09-2007, 01:45 PM #2
03-09-2007, 02:01 PM #3
03-09-2007, 05:27 PM #4
- Join Date
- Dec 2006
- Crest Hill, IL
03-09-2007, 05:33 PM #5
I have one for you if your RXP does not have one. You just need to make a bracket for it and get the breather....
03-09-2007, 05:36 PM #6
Hey how did you do the brackett on the 06?
On my 04 I just used a short piece of hose and installed it wright there.
It works great, but I haven't mounted the 06's....
03-09-2007, 05:42 PM #7
I took a L bracket with four holes in it, (from depot) bent one side of it in a vise to curve it a bit, drilled the holes in the catch can, and pop riveted it on. then bolt the other side to the exhaust manifold bolt. You could see it in the pic, its painted black....
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Green Hulk in forum Yamaha PWC Performance (4-stroke)Replies: 91Last Post: 10-17-2013, 10:58 AM
By Slick PWC in forum Polaris Open DiscussionReplies: 0Last Post: 04-18-2009, 05:20 PM
By OLDJETSKIMAN in forum Polaris Open DiscussionReplies: 0Last Post: 02-10-2009, 09:25 PM
By peteshauling in forum Sea Doo Open DiscussionReplies: 17Last Post: 03-07-2006, 07:55 PM
By Enufpwr in forum 4-Tec PerformanceReplies: 18Last Post: 07-06-2005, 03:38 AM