08-07-2013, 10:12 PM #1
- Join Date
- Apr 2013
- Ottawa,Belleville Ontario Canada
Carb jetting question white 951 1998 GSX ltd 5625 chassis code mains and pop off issu
Hey guys I am rebuilding my carbs on my 1998 GSX ltd with white 951 chassis code 5625.
Now I took it apart and here are my issues. The mains the book says 162.5 in the PTO and 162 in the MAG. I pulled out 162.5 in both. The book says the pilots should be 80 , I pulled out 77.5 and also when I pulled out the low speed adjustment screws they were out more then the 1 and 3/4 turns the book says.
also the book says 42-46psi pop off pressure for the 5625 .
My motor is a white motor but has a silver jug on it .
question is for now should I get some 80 pilots and set the motor to the 42 psi pop off pressure ??
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mikeysso in forum 2-Stroke PerformanceReplies: 5Last Post: 09-13-2012, 09:01 PM
By Asmarine in forum Sea Doo 2 Stroke SkisReplies: 10Last Post: 06-01-2010, 09:28 PM
By hawkrdr in forum Sea Doo 2 Stroke SkisReplies: 11Last Post: 10-12-2009, 10:36 AM
By DooMeister in forum 2-Stroke PerformanceReplies: 3Last Post: 09-11-2008, 10:43 AM
By rxp05 in forum 2-Stroke PerformanceReplies: 20Last Post: 03-30-2007, 01:29 PM