Results 1 to 9 of 9
  1. #1
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311

    High Temp At Wot

    Problem number 2 when I run WOT 8100-8150 my high temp alarm comes on I let off the throttle back to 7600-or so and it goes away I could run at 7900 and no alarm but when WOT it goes off and just for info I added a B-KIT and 4" air intake before I did not have this happen, any suggestions?


  2. #2
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    I've had the same problem twice now . Do a compression test , and a leakdown test....more than likely a blown head gasket/and or valves leaking compression. You are probably loosing coolant out of the overflow tube also.

  3. #3
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    i have not noticed any coolant leaking or the level dropping I will check the compression but how do I do a leakdown test

  4. #4
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    You'll need the tool, or just have a dealer do it for you.

  5. #5
    I don't think it is the head gasket you would be losing fluid.It might be the temp sensor in the water box.You can take it out and put a plung in there and just zip tie it to your exhaust hose.

  6. #6
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    Like mitch said , try zip tying your sensor to the coolant tank hose, thats where mine was when I had the same problem.

  7. #7
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    I want to double check everthing, back flush intercooler, make sure my hoses are not in a bind

    I will look at the sensor not real sure where I would put it if I move it or are you saying remove it plug the hole and just zip tie to keep it out of the way

  8. #8
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    try zip tying your sensor to the coolant tank hose, here's mine
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_0299.jpg 
Views:	100 
Size:	526.5 KB 
ID:	18398  

  9. #9
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    Thanks sometimes i need pictures

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. High RPM at Idle and losing RPM at wot
    By Redsea_rider in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-02-2014, 08:20 AM
  2. Cooler Temps at last
    By BertInTexas in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 11-21-2008, 11:03 AM
  3. High Temp Warning
    By Gforce in forum 4-Tec Performance
    Replies: 14
    Last Post: 06-23-2008, 05:41 PM
  4. iDoes riding in the chop at WOT trigger High Temp?
    By Hecyan in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-02-2006, 07:03 PM
  5. Remanufactured motor ran at WOT without Break in.
    By ccassone in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 03-19-2006, 08:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •