08-12-2013, 08:55 PM #1
Where is the scavenger pump & screen on 4tec 215hp
my sc dropped the needle bearings and have read about checking the front scavenger pump housing & screen .... where is this located on my machine. 2007 challenger with the 215. Any pics would be great also.. Thanks Doc
08-13-2013, 02:48 PM #2
- Join Date
- Jan 2009
- Scotland, UK
If you follow the plastic filler tube downwards, you`ll see its bolted via two, M6 Torx Flanged Screws, to the oil scavenge pump assembly, which in turn is bolted to the front of the motor.
Inside this aluminium housing, you`ll find the front oil pump and screen. The housing itself is held onto the motor by six, M6 Torx Flanged Screws.
You will need to remove these eight Torx Screws to remove the oil pump assembly.
Last edited by heckie; 08-13-2013 at 03:04 PM. Reason: Additional info
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By redline808 in forum Kawasaki PWC Performance (2-stroke)Replies: 6Last Post: 04-09-2013, 07:50 PM
By JeffSki in forum 4-Tec PerformanceReplies: 6Last Post: 06-04-2008, 06:15 PM
By gbest in forum 4-Tec PerformanceReplies: 1Last Post: 07-03-2007, 03:05 PM
By XRIDER in forum Sea Doo Open DiscussionReplies: 9Last Post: 02-01-2007, 04:33 PM
By CarFanatic in forum Sea Doo Open DiscussionReplies: 9Last Post: 05-31-2006, 06:27 PM