First timer so here I go.. I have a 1999 slth 700 twin which I traded for ...ran great when I got it last fall but took water on..this year it starts out with a vibration , ends up being the impeller bearings were blown all apart..fixed that (300 dollars later) ..took it out again ran awesome till it shut off like pulling your tether switch I have no spark, read out the stator and readings are bad,also cdi has three raised bubbles which looks like its from heat from the my question are if a stator lets go ( maybe a
water got in ) would that take out the cdi too..secondly where on earth can I find a update kit that has been discountiued now , Reasonable.. I found some already except 800 is a lot of money for something which was 400 or less... Any ideas would be great and appreciated