Thread: 2003 genesie I will not run.
08-14-2013, 06:52 PM #1
- Join Date
- Aug 2013
2003 genesie I will not run.
found out about the pressure regulator the hard way.reinstalled in other plug on top of pump.only have 20psi. will start then shuts off.will not stay running. new motor in 2010. 130psi all three .
08-14-2013, 07:26 PM #2
- Join Date
- Jul 2007
- near Toronto, Canada
20PSI is a tad low for fuel pressure, but not enough to be a problem.
Connect neon glow type inline spark testers inline with each spark plug. Start engine and hold down Start button. Does the spark disappear before the engine stops?
Make sure you are using the correct NGK PZFR6H spark plugs. No substitutes.
You can bypass the LR-503 module for testing.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By banker22 in forum Polaris How To & FAQsReplies: 1Last Post: 02-17-2012, 06:20 PM
By sdrake in forum Polaris Open DiscussionReplies: 5Last Post: 08-22-2011, 08:13 PM
By ab750 in forum Polaris How To & FAQsReplies: 4Last Post: 08-06-2008, 08:19 PM
By dabeetereater in forum 2-Stroke PerformanceReplies: 3Last Post: 07-19-2008, 12:10 PM
By maui in forum Polaris How To & FAQsReplies: 13Last Post: 04-10-2008, 08:24 AM