Results 1 to 8 of 8
  1. #1

    The difference in the Intercooler? Stock vs Fizzle Intercooler Upgrade Kit

    Good day! I installed this intercooler on RXP 260 RS
    http://www.4-tecperformance.com/inde...oducts_id=2050


    but as the stock intercooler and it shows 124 Fahrenheit on the inlet. confused


    Yours


  2. #2
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,625
    +1
    806
    Make sure the cooling line FROM the pump is hooked up to the water fitting on the intercooler closest to the throttle body side of the ski. Having the lines reversed will result in higher temperatures.


    Quote Originally Posted by egor View Post
    Good day! I installed this intercooler on RXP 260 RS
    http://www.4-tecperformance.com/inde...oducts_id=2050


    but as the stock intercooler and it shows 124 Fahrenheit on the inlet. confused


    Yours

  3. #3
    Yes, I hooked it up right!

    Yours

  4. #4
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,625
    +1
    806
    Quote Originally Posted by egor View Post
    Yes, I hooked it up right!

    Yours
    Then I'm not sure what is causing the problem. This cooler usually produces air intake temperatures about 5-18 degrees above water temperature.

  5. #5
    imp0ster's Avatar
    Join Date
    Dec 2011
    Location
    Palm Harbor, FL
    Posts
    5,037
    +1
    672
    High temps on a good IC points to a obstruction in the cooling system or a bad core.

  6. #6
    TheGunMan's Avatar
    Join Date
    Feb 2013
    Location
    Las Vegas
    Posts
    454
    +1
    41
    how do you monitor the air temp after the IC

  7. #7
    Good day! I connect diagnostic equipment to the boat and see the temperature with the engine running at the speed! I also replaced the temperature sensor in the intake kolletore and at the moment it is 94 Fahrenheit and it is also very much! temperature of the water in our pond from 18do 25 degrees Celsius

    for example I use a Garrett 1000 turbo on my boat and I see 23 -29 degrees Celsius to 25-30 degrees Celsius water with air to 40 degrees Celsius

    Yours

  8. #8
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Quote Originally Posted by TheGunMan View Post
    how do you monitor the air temp after the IC
    The easiest way IMO is to install a bung in your IC to TB pipe (fairly cheap) and then install one of these.

    http://www.trailtech.net/tto_temperature.html

    The M6 1.0 screw in sensor

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Fizzle F1000 OEM Intercooler Upgrade Kit now available
    By Green Hulk in forum 4-Tec Performance
    Replies: 18
    Last Post: 07-20-2014, 07:51 PM
  2. Differences in pump design 66V vs 60E
    By mdavidthomas in forum Kawasaki How To & FAQs
    Replies: 0
    Last Post: 05-20-2014, 06:46 PM
  3. RIVA's stock intercooler upgrade kits are now shipping
    By Green Hulk in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 11-15-2009, 09:32 PM
  4. Who Is Running the R&D Intercooler Upgrade Kit?
    By ercBOOSTED in forum Kawasaki PWC Performance (4-stroke)
    Replies: 3
    Last Post: 05-19-2008, 06:55 PM
  5. Skip, Any news on that intercooler upgrade kit?
    By ercBOOSTED in forum Kawasaki PWC Performance (4-stroke)
    Replies: 2
    Last Post: 12-02-2007, 12:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •