08-22-2013, 07:13 PM #1
Need some help wiring up some gauges
Tryen to wire up my afr an boost guage at the same time but i just done the afr ,and
My problem is when powered on it just flashes 7.4 and does nothing else any
Input advise and or even the best(pictures) can help out alot.
08-22-2013, 07:47 PM #2
You usually need to free-air calibrate a WB02 before using it, and every XX months, depending on usage and NA/FI. Check the WB's install manual.
08-22-2013, 10:21 PM #3
08-23-2013, 08:16 AM #4
08-28-2013, 11:10 PM #5
- Join Date
- Sep 2010
- Saint John, New Brunswick
TJEEZE - I'm looking to do the AFR and boost gauge also, I think our RXPs are the same year based on your avatar - I'm not having any luck finding out for sure what purple wire to use that only powers up when the DESS is connected..did you go that way or are you using a switch to control the gauges?
I skinned a purple wire in the top little storage compartment - but it appears to always have power.
08-29-2013, 05:42 PM #6
- Join Date
- Apr 2012
- seffner fl
in the front compartment, by the fuses there is a square plug. check the purple wire on that. it should be switched.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By TMPLUMBER59 in forum 2-Stroke PerformanceReplies: 5Last Post: 09-04-2009, 12:08 PM
By juggaloXPracer in forum 2-Stroke PerformanceReplies: 1Last Post: 06-21-2007, 05:06 PM
By CRS in forum 4-Tec PerformanceReplies: 13Last Post: 05-15-2006, 05:24 PM
By RXP04 in forum Sea Doo Open DiscussionReplies: 10Last Post: 04-20-2006, 04:36 PM
By MARKUS in forum 2-Stroke PerformanceReplies: 21Last Post: 02-09-2006, 05:18 PM