08-23-2013, 10:09 AM #1
4" front vs 4" rear stack with filter RXT
Is there any advantage to me removing the extra 7ft of 4" Flextube and placing the filter just under the rear seat of the RXT? Besides it being way easier to remove and clean?
08-23-2013, 10:12 AM #2
- Join Date
- Jul 2005
- Lake Dunlap, Texas
I have found filters cost you 60 to 100 RPM. Try it out yourself and see.
08-23-2013, 10:30 AM #3
I run a large element but I'd like to remove the extra tube and get it out of the way of the way of my fogging the motor mount and that side of the engine.
08-23-2013, 10:33 AM #4
my rxp had a kanaflex to the front, I swapped that out for a Riva Rear air and it was a night and day difference.
08-23-2013, 10:37 AM #5
08-23-2013, 10:37 AM #6
so is what I what to do essentially rear air? Just put like a 1.5ft run of the flextube with the large filter on it under the rear seat?
08-23-2013, 10:38 AM #7
08-23-2013, 10:39 AM #8
i am instaling 4" solid rear with jlewis adapter next. But this set up have been on all summer and its worry free.
08-23-2013, 10:43 AM #9
I run six frogskinz in the rear. I just bought a solid 4" aluminum 90 exhaust pipe with a coupling the the 4" sc adapter. You can get them in different length. I got 12" and measured it up, cut each side so it fit just under the rear seat vent with the couling on. think it was 30$ at an auto parts store.
08-23-2013, 10:46 AM #10
I'll have to check clearance since I'm keeping the rear insert since it holds my first aid kit and sun screen. You also have a RXP. I thought the XT was different back there.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By grantuk in forum Sea Doo 2 Stroke SkisReplies: 1Last Post: 11-01-2012, 08:51 PM
By clar in forum Yamaha PWC Performance (4-stroke)Replies: 3Last Post: 03-31-2009, 06:33 PM
By paulgp602 in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 02-13-2009, 12:40 PM
By FastFlow in forum 4-Tec PerformanceReplies: 9Last Post: 06-13-2007, 08:39 PM
By two2curupt in forum 4-Tec PerformanceReplies: 10Last Post: 02-13-2007, 12:15 PM