Thread: 1995 seadoo speedster
08-25-2013, 06:05 PM #1
1995 seadoo speedster
I have a question. I have a seadoo speedster boat. Has 2 rotax motors in it. And the drivers side motor were the shaft goes threw the hull behind the engine has a plastic fitting that broke off. The rubber hose connects to it and the other end behind the engine. Well my question is do I have to pull the engine out or can I pull all the stuff from the jet and pump and replace it that way? If anyone has had to replace this please help Will post pics soon of what I'm talking about.
08-25-2013, 06:47 PM #2
If your talking about the thru hull fitting, no, you don't need to remove the motor to replace it...But you will need a sawzall or cut off wheel to make it flush.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GDUNNREMO in forum 2-Stroke PerformanceReplies: 0Last Post: 07-11-2011, 05:07 AM
By keith neff in forum Sea Doo ClassifiedsReplies: 1Last Post: 01-03-2011, 09:06 PM
By porschemaniac in forum Performance Boats ClassifiedsReplies: 1Last Post: 10-22-2010, 12:12 PM
By fireboy in forum Sea Doo Sport BoatsReplies: 3Last Post: 07-20-2009, 03:49 PM
By bkmach in forum Sea Doo Sport BoatsReplies: 4Last Post: 05-19-2008, 09:46 PM