Results 1 to 6 of 6
  1. #1

    Join Date
    Jul 2008
    Location
    CORSICA
    Posts
    40
    +1
    1

    2008 15f sensor issue

    hi,

    i'm having issue with my 2008 stx15f.

    the oil temp sensor is gone ( values was out of range)

    i've switch with water sensor and the default change so no doubt about a bad sensor.

    a friend of mine gave me a sensor from a 2009 ultra 260x (oem ref is the same but engraving do not end the same 7XF vs 8ZA) values are the same
    7XF 2300 kOhms
    8ZA 2200 kOhms

    (out of the motor on the bench)

    ski was running but i issue some missfires on steady run 4k rpms was where i can heard the most of them.

    I ordered 4 sensors of the new P/N 21176-0741 like it was adviced here. http://www.greenhulk.net/forums/showthread.php?t=183971

    After having them mounted not a chance to run the motor ... heat default code ...

    here is the value of the sensors : 10.9k , 10.96k

    according to the service manual those values are way out of range for a temperature near 20C

    As someone having this kind of issues with the news P/N sensors ???

    PS: I'm not bashing anyone i just what to know if someone already as those issues.
    PS2 : new plugs, 200h motor

    thanks


  2. #2

  3. #3

    Join Date
    Jul 2008
    Location
    CORSICA
    Posts
    40
    +1
    1
    i've forgot to say both sensors have been changed... oil and water

    i was comparing P/N of 2008 vs 2013 STX15F parts and the new 21176-0741 sensor comes with a new ECU 21175-0807 in 2013.

  4. #4
    TexasZ's Avatar
    Join Date
    May 2012
    Location
    Near San Antonio, Texas
    Posts
    460
    +1
    34
    You lost me in the tech readings and afterwards.

    Did your motor start after you installed the new 21176-0741 sensors?
    If not, perhaps that means they will only work with the newer 0807 ECU.

  5. #5

    Join Date
    Jul 2008
    Location
    CORSICA
    Posts
    40
    +1
    1
    No start and i've tested all the 4 new sensors i've.
    that what i was thinking... new 0741 sensors only work with 0807 new ECU ...

  6. #6
    My name is Sean and I am addicted to STXs smokeysevin's Avatar
    Join Date
    May 2008
    Location
    Houston
    Posts
    4,485
    +1
    320
    Ill check with my buddy at Kawasaki.

    Sean

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2008 stx 15f starting issues
    By KGK in forum Kawasaki PWC Performance (4-stroke)
    Replies: 13
    Last Post: 07-14-2015, 04:51 PM
  2. 2008 STX-15F Vibrating Issue and more
    By stxmichael in forum Kawasaki PWC Performance (4-stroke)
    Replies: 10
    Last Post: 07-10-2012, 12:07 PM
  3. 2008 15f tip over sensor question?
    By cdevido in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 07-15-2010, 04:40 PM
  4. Ultra 08 Heat sensor issue.
    By Skips313 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 9
    Last Post: 03-04-2008, 10:05 AM
  5. 2007 15f Vs. 2008 15f
    By Johnnyjetski in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 10-30-2007, 03:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •