Thread: 07 RXT Gauges Dead
09-03-2013, 02:35 PM #1
07 RXT Gauges Dead
I checked the fuse and its good and I also checked and for 12 volts on the plug that connects to the cluster and its good. Also checked the CAN HI and CAN LOW jumpers in the fuse box which are also good. I'm thinking its the cluster that has issues. Has anybody ever cracked one up to check the board for a broken solder joint or moisture. They will intermittently come back on from time to time so i'm thinking something is loose in the cluster. Thoughts suggestions?
09-05-2013, 03:05 PM #2
Any ideas yet other than the rice bag?
09-05-2013, 03:13 PM #3
If you have moisture you can put the guages in a air tight bag with damp rid.
It will get rid of the moisture but guages still might not work.
09-05-2013, 03:20 PM #4
As is they come on for a bit, then stop working... then randomly come back on.
09-05-2013, 03:34 PM #5
Disconnect the 4 pin Plug check for continunity, I assume your getting Power at the Purple wire? make sure all four wires have no shorts. There should be white with red stripe,Black,purple, white with Black Stripe. There's also a diode Cap By fuse box as well.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By eb87 in forum 4-Tec PerformanceReplies: 1Last Post: 05-28-2010, 12:22 PM
By RobbieMWD in forum Sea Doo Open DiscussionReplies: 3Last Post: 03-13-2009, 05:13 PM
By miamirider in forum Sea Doo ClassifiedsReplies: 2Last Post: 12-19-2008, 12:28 PM
By 200%absolut in forum 4-Tec PerformanceReplies: 14Last Post: 08-25-2008, 05:17 PM
By lawracing in forum 4-Tec PerformanceReplies: 10Last Post: 07-24-2008, 10:34 PM