Thread: 2000 polaris virage 700 No spark
09-03-2013, 07:48 PM #1
2000 polaris virage 700 No spark
I have no 9v at brown wire from cdi to stator.
I Have unplugged Brown wire added 9v battery still no spark
Virage has new Lr505 module But i bypassed anyway still no spark
Can someone tell me what gives the Brown Wire from cdi 9v???????????
I have done all the test for hall effect sensors. everything test good
09-03-2013, 10:42 PM #2
- Join Date
- Jul 2013
GROUND! Check the ground to the engine at the stator plate behind the flywheel, if it does not ground properly you will not see voltage, chased that problem for over a moth on my SLTX and even replaced the stator but I still didnt clean off the plate/contacts well enough. If there is any corrosion back there it will take some patience.
09-03-2013, 11:16 PM #3
ok I will check that tomorrow and get back. thanks
09-04-2013, 12:54 PM #4
The plate did have corrosion. I cleaned both sides and ground is much stronger.
I found purple wire rubbed through onto harness bracket inside housing. Causing it to ground out.
I am waiting for new stator in mail before I put back everthing back fow more testing.
09-10-2013, 02:56 PM #5
put new stator in polaris today.
Brown wire now has 9v and spark
Runs great thanks
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By rameseesk in forum Polaris PWC PerformanceReplies: 11Last Post: 09-10-2013, 05:38 PM
By cameron in forum Polaris Open DiscussionReplies: 22Last Post: 02-06-2013, 11:09 PM
By sltfan777 in forum Polaris How To & FAQsReplies: 2Last Post: 08-30-2011, 08:14 PM
By craig connolly in forum Polaris Open DiscussionReplies: 2Last Post: 03-16-2010, 11:47 AM
By itismejoshy in forum Polaris Open DiscussionReplies: 4Last Post: 09-18-2009, 03:13 PM