09-10-2013, 06:28 PM #1RookiepwcGuest
Anyone live in Southern Cal that can teach me how to rebuild my carbs on 1200xl ltd
Just thought I would throw it out there.
I recently purchased a used 1200xl ltd and it doesn't idle very good and sometimes bogs down. It will get to wot though.
I am thinking the carbs need rebuilding but not sure on how to tackle this myself.
I am in the inland empire
09-10-2013, 08:04 PM #2
With a little bit of patience, it's not hard at all. Just take apart, clean, and goes back together the same way. It takes more time taking them off.
09-10-2013, 08:07 PM #3
- Join Date
- Jun 2012
- Pasadena, MD
If you have the time and some basic tools you can do this yourself. There is a lot of good information here on this forum. I was able to find instructions on stinger, exhaust chamber and carb removal from the Cajundude.com webpage. He has step by step instructions with pictures which makes it easy for a first timer. Also, when I got stuck I would post my question here and got quite a bit of advice and instruction. If you decide to do it I can send you pictures and a parts list of what you need to make a pop off gauge.
09-11-2013, 04:47 PM #4
- Join Date
- May 2013
Pm smlaker he just did a rebuild using oside bill recommendations rip bill
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Astonmartin in forum Sea Doo Open DiscussionReplies: 2Last Post: 07-21-2011, 10:08 PM
By 1 FAST VE in forum Yamaha PWC Performance (4-stroke)Replies: 16Last Post: 08-21-2010, 10:39 AM
By rhislo in forum Sea Doo Open DiscussionReplies: 8Last Post: 09-26-2008, 02:59 PM
By timetoshine11 in forum 4-Tec PerformanceReplies: 4Last Post: 09-07-2007, 09:10 PM
By Jeff C in forum Sea Doo Open DiscussionReplies: 0Last Post: 05-22-2007, 02:28 PM