09-12-2013, 08:17 AM #1
can i use a 2 stroke primer kit with 2 stroke oil to fog/lube my 4tec via the TB?
I ride in the salty stuf. and have the common problem of the TB rusting up, ive also have the exhaust valve failures from super bad rusty valves/seats.
I want to lube my TB. and Intake.
I know of the mods that can be done on the inlet to fog from the 3 plastic lugs on there. and I know of the retro fit for the seadoo oem TB lube kit.
and I know people have different views on putting oil through the OEM IC but my thoughts are that if u used 2 stroke oil it would "blow threw the IC elements" and carry on into the head.
2 stroke oil also burns well. so it will run ok after fogging (just smoke loads.) and lubricates nicely.
ive got a nice jetski fogging kit (which uses the primer style plunger pump) ive blown into the outlet port on the plunger and I feel confident I wouldn't get a boost leak from the primer pump.
09-12-2013, 08:25 AM #2
Yes but I would use fogging oil rather then 2-stroke its much thinner like wd40.
09-12-2013, 10:17 AM #3
09-12-2013, 11:00 AM #4
put the 2 smoke oil in the gas tank
that is the only way to lube your fuel pump and injectors
then just lube up the TB
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By peteshauling in forum 4-Tec PerformanceReplies: 28Last Post: 03-31-2014, 04:03 AM
By neverdone in forum Kawasaki How To & FAQsReplies: 3Last Post: 06-08-2012, 05:27 PM
By Iris in forum 4-Tec PerformanceReplies: 2Last Post: 02-10-2011, 04:03 AM
By 3800rs in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 08-14-2008, 03:25 PM
By Therock in forum 4-Tec PerformanceReplies: 4Last Post: 06-06-2005, 02:56 PM