09-21-2013, 12:53 PM #1
MoTeC M130 in a Seimans based ECU ski...2008 RXT-X255
09-21-2013, 12:56 PM #2
09-21-2013, 12:57 PM #3
The install is made easy with a direct plug and plug wiring harness from Nils. Also included is a block off plate for the IAC valve, which is no longer used. Also, re-use or buy a new o-ring (from the IAC) for the block off. Had I thought about it I should have cut off the unused part of the throttle cable bracket.....its simply in the way and not needed.
Last edited by 1tommygunner1927; 09-21-2013 at 02:30 PM.
09-21-2013, 01:05 PM #4
The MoTeC M130 has its own mounting plate. I modified the stock ECU mounting plate as I was going to mount the MoTeC plate flat, directly to the stock plate. This mod to the stock plate is not necessary......as the MoTeC plate will still install without cutting off the raised portion of the stock plate. All the mounting hardware is include in the kit! The plastic bracket which is attached to the number 3 runner can also be removed.
09-21-2013, 01:31 PM #5
Aside from the fact MoTeC is the best ECU available, the support from Nils is second to none. He has called me numerous times to check on my progress and is very patient in explaining various topics, such as configuring certain parameters of the ECU. Understand we are in "unchartered waters" for the MoTeC M130 in the older model SeaDoos......however, my first water test tells me this is a very doable upgrade.
I also purchased the level 2 data logging and ID1000 injectors. If one orders the injectors separately be sure to order the USCAR/EV1 adapters for plug and play to the stock injector harness.
Last edited by 1tommygunner1927; 02-05-2014 at 04:51 PM.
09-21-2013, 01:32 PM #6
Nice tommy i need to make some tweaks to the m130 if You dont mind sending it to me. I have no problem reinbursing you the money in the meantime
Yes I would advise ( oops my advice lol) any one buying or needing any advice on the motec system to talk to Nils!!!! He is always a call away
09-21-2013, 02:24 PM #7
LOL....I would have sent you JT's M130 but the MoTeC boys saved his a$$!
09-21-2013, 02:37 PM #8
- Join Date
- Aug 2007
I just looked up the price on some MoTeCs holy
09-21-2013, 03:03 PM #9
Thanks for posting this Bob, I have been curious about the Motec installation on a Siemens ski.
09-21-2013, 03:18 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Green Hulk in forum 4-Tec PerformanceReplies: 54Last Post: 09-04-2013, 09:30 AM
By Kaszagy in forum Sea Doo ECU SupportReplies: 5Last Post: 09-25-2012, 12:48 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 55Last Post: 08-21-2012, 10:53 AM
By Green Hulk in forum Sea Doo ECU SupportReplies: 0Last Post: 07-15-2012, 05:47 PM
By Brera Hifi in forum Sea Doo ClassifiedsReplies: 0Last Post: 01-27-2011, 12:34 PM