10-02-2013, 06:27 PM #1
CMD Throttle calibration problem!!!!
I am trying to calibrate the throttle and for some reason is showing is showing 87% throttle after the calibration. I just put the engine back together after a rebuild, could it be that I have to reset the TPS?
10-03-2013, 06:03 AM #2
The first thing to verify is that you are really getting full throttle. I take off the rubber hose to the throttle and look in with a light and a mirror to see iff the throttle looks all the way open.
10-03-2013, 01:27 PM #3
hey at least now when you wax someones ass on the water you can look over and say " and that was only on 87% power BIATCH"
10-03-2013, 08:11 PM #4
throttle body wasn't adjusted properly!!! Thanks guys
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By The Hammer in forum Polaris Open DiscussionReplies: 1Last Post: 05-20-2012, 08:33 PM
By absentx in forum Polaris Open DiscussionReplies: 62Last Post: 05-24-2010, 08:56 AM
By shkdwn387 in forum Polaris Open DiscussionReplies: 2Last Post: 06-25-2008, 10:54 AM
By jem in forum Sea Doo Sport BoatsReplies: 6Last Post: 11-20-2007, 10:13 PM
By jonjonwells in forum Polaris Open DiscussionReplies: 8Last Post: 04-20-2007, 02:58 PM