Results 1 to 2 of 2
  1. #1

    Rub Rail Replacement

    Hello everyone! Great place you have here. Purchased two upgrades in July to replace our old 2 strokes. Ended up with an 2011 GTI SE 130 and a 2011 RXT 260.
    Unfortunately, someone bumped into the GTI while it remained on the trailer on our last ride. Looks like the only damage is a small dent in the side rubrail. Obviously the front and rear corner bumpers are bolt on items and easily removed. Any tricks to removing the side rail to replace it? Thx.


  2. #2

    Join Date
    Jan 2009
    Location
    Scotland, UK
    Posts
    290
    +1
    9
    Quote Originally Posted by 66gtragtop View Post
    Hello everyone! Great place you have here. Purchased two upgrades in July to replace our old 2 strokes. Ended up with an 2011 GTI SE 130 and a 2011 RXT 260.
    Unfortunately, someone bumped into the GTI while it remained on the trailer on our last ride. Looks like the only damage is a small dent in the side rubrail. Obviously the front and rear corner bumpers are bolt on items and easily removed. Any tricks to removing the side rail to replace it? Thx.
    Have you tried heating the rub rail gently with a hot air gun or hair drier in the dented area. Try this and see if the dent will come out before you go to the expense of buying new parts. Just dont over heat it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replacement Rub Rails?
    By CrazyA in forum Polaris Open Discussion
    Replies: 3
    Last Post: 02-23-2011, 10:22 AM
  2. replacement rub rails?
    By dr.ipper in forum Polaris Open Discussion
    Replies: 13
    Last Post: 04-03-2008, 06:11 PM
  3. who could get the rub rail
    By RXPNJ in forum 4-Tec Performance
    Replies: 2
    Last Post: 04-13-2006, 07:07 PM
  4. black rub rails
    By rxpblast in forum Sea Doo Open Discussion
    Replies: 17
    Last Post: 01-20-2006, 11:49 AM
  5. SeaDoo rub rails?
    By Pee2xUSee in forum 4-Tec Performance
    Replies: 7
    Last Post: 06-22-2005, 07:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •