Results 1 to 6 of 6
  1. #1

    Join Date
    Mar 2009
    Location
    Netherlands antilles / Bonaire
    Posts
    137
    +1
    4

    advice.. am i missing something ..a must have mod.. anything..

    Looking for some advice.
    I have a rxp x 2008 with a couple of mods..
    am i missing something?:

    riva airintake
    riva ride plate.
    riva intakemanifold upgrade
    riva intake
    riva supercharger upgrade
    riva pumpwedge
    riva vts rod
    riva pump end not shure how its called with the rings
    solas impeller
    Riva free flow waterbox
    Riva springs plus retainers
    riva performance valve set
    fizzle openloop.
    fizzle intercooler.
    hks blow of valve
    rotax racing ecu with injectors
    cp racing pistons
    blocked of beginner stearing.

    hope you guys have some good advice for me.

    Thanks
    Last edited by spacerrr; 10-12-2013 at 11:06 AM.


  2. #2
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Get some pressure relief for the pump tunnel or else you may hurt your self.
    Loose the BOV.

  3. #3

    Join Date
    Mar 2009
    Location
    Netherlands antilles / Bonaire
    Posts
    137
    +1
    4
    orderd! thanks!

  4. #4
    dnielsen's Avatar
    Join Date
    May 2008
    Location
    Shreveport, Louisiana
    Posts
    2,018
    +1
    94
    Looks like your lean on fuel to me, not sure how the Rotax ECU is mapped but If your planning on using the stock 42s you'll cook those new CPa. Good luck with the build. You may also want to add an R&D grate, it won't break thus saving your teeth. PRVs are a must on that platform. Your also gonna need a way to monitor AFRs so you can tune, add a RRFPR so you can adjust fuel pressure, some bosch 48s or 50s will help out on the fuel.

  5. #5
    dnielsen's Avatar
    Join Date
    May 2008
    Location
    Shreveport, Louisiana
    Posts
    2,018
    +1
    94
    Just caught your sig, I see you already have a set of 60s

  6. #6
    boost junkie skidoochris's Avatar
    Join Date
    Mar 2012
    Location
    Davison, Mi
    Posts
    4,494
    +1
    476
    no afr gage with racing pistons ....lol

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. IC question, am I missing something?
    By "NO SHOW" in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-09-2012, 11:20 AM
  2. Am I missing something here? Low
    By SkiBoy720 in forum Yamaha PWC Performance (2-stroke)
    Replies: 25
    Last Post: 05-08-2012, 12:20 PM
  3. am i missing something
    By weezzell5400 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 05-18-2011, 12:20 PM
  4. Am I missing something?
    By flkeyzgp1300r in forum Yamaha PWC Performance (4-stroke)
    Replies: 19
    Last Post: 08-03-2010, 10:22 AM
  5. Am I missing something here?
    By Tony in forum Polaris Open Discussion
    Replies: 7
    Last Post: 07-19-2007, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •