03-15-2007, 08:35 PM #1
Open loop cooling kit now available
This kit provides you with the hardware you need to remove and block off the stock thermostat and feed water to the head.
It also comes complete with a sacrificial annode and water drain fitting to drain the engine of water after use.
03-15-2007, 08:36 PM #2
Special thanks goes out to hydrotoys for all his testing and coming up with a plumbing diagram to make this system work.
03-15-2007, 10:00 PM #3
thats a really nice peice !
03-15-2007, 10:17 PM #4
03-15-2007, 10:18 PM #5
03-15-2007, 10:18 PM #6
03-15-2007, 10:20 PM #7
- Join Date
- Feb 2006
- Birmingham AL
Pro's and Con's they are the same thing they play football
03-15-2007, 10:21 PM #8
HOLY COW...FOR THAT PRICE!!!!!
We gonna see some speed now gentlemen! Bring on the rideplates!!!
03-15-2007, 10:22 PM #9
Sweet! Gearing up for new ride plate mods??? JD's plate maybe? Looks real nice.
03-15-2007, 10:25 PM #10
Copied from Dan:
heres a basic layout pic
theres a m12-1.5 so that you can relocate the temp sensor that is in the head.
you will need to plug the hole in the head were the sensor use to be. You should be able to find a m12-1.5 short bolt about 20mm long at a autoparts store. or i think you may be able to use the same plug that is in the block where you would use "the locking tool" for the crankshaft. was hoping maybe jerry or someone with a motor out could varify this. anyway that part number is 420841923.
ive also included the 1/4 for the anoide and a drain fitting allready installed. you will probbly want to set up a small like 3/16 low point drain out the back to gravity drain the cover.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JFizzleJR in forum 4-Tec PerformanceReplies: 6Last Post: 12-09-2010, 11:04 PM
By Tiburon1264 in forum 4-Tec PerformanceReplies: 94Last Post: 04-15-2010, 10:50 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 393Last Post: 11-24-2009, 09:52 PM
By cliff0413 in forum Sea Doo ClassifiedsReplies: 0Last Post: 11-30-2008, 02:35 PM
By mastacks in forum 4-Tec PerformanceReplies: 7Last Post: 07-08-2008, 10:49 AM