10-14-2013, 02:50 PM #1
Base Fuel pressure for C3 and a R3 flash
Guys I am at 48lbs base fuel pressure with my R3 type 14 ic set up on a stock SCer. Im gonna install the C3 and would like to know the base fuel pressure to start with to get me close Afr's.
100% outside air intake.
Also what prop are you guys useing on this set up? Thanks everyone.
10-14-2013, 03:28 PM #2
10-14-2013, 03:35 PM #3
Jerry thank you sir, I overlooked the obvious.
Gonna go up to 52lbs.
I have a 13/22 dynafly i think im gonna pop in it. as Im gonna be under proped now.
10-14-2013, 08:17 PM #4
start at 52 (static) like jerry said.. but it will depend on how many rpm's your planning to turn
a skat 14/20 ~21 should get you to 85-8600 rpm's thru the stock exit nozzle wich would be my choice.
if you want to stick to the dyna, you want to repitch it to 15 on the leading edge and again the trailing is gonna depend on the rpm's your shooting for.
10-14-2013, 09:12 PM #5
Thank you I plan on turning it 8750RPM Im gonna pull the pump tomorrow and check the skat prop and I may repitch it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Jwall in forum 4-Tec PerformanceReplies: 4Last Post: 05-13-2013, 02:28 PM
By motormadness in forum 2-Stroke PerformanceReplies: 0Last Post: 07-16-2011, 10:45 PM
By ecpChris in forum 4-Tec PerformanceReplies: 10Last Post: 06-04-2010, 12:33 PM
By ULTRA 250XXX in forum Kawasaki PWC Performance (4-stroke)Replies: 1Last Post: 06-09-2008, 03:52 PM
By Rodneyae in forum Polaris PWC PerformanceReplies: 2Last Post: 01-23-2007, 06:39 AM