Results 1 to 5 of 5
  1. #1

    Join Date
    Jul 2006
    Location
    Beaufort, SC
    Posts
    592

    this summers mods...advice with order

    im removing the opas and doing the RE block offs. i currently removed the factory exhaust and put a resonator in its place. i already have a 4" intake i would like to do a through hull on the exhuast mani side, like some guys have done already. my question is how much baffles should i take out. i dont want to loose top end, thats where the fun is. but i dont want to loose accel either. at the same im going to fab up an intercooler and piping. i have a brand new miller syngrowave 200 sitting in my shop and im pretty good with it. that would be it for this summer probably. any thing i should be aware of? dont need to watchout for my rev limiter or anything like that with just these mods right....


  2. #2
    Moderator The Bandit's Avatar
    Join Date
    Jul 2006
    Location
    Wilmette, IL
    Posts
    8,373
    you will will need to change the prop if you add an intercooler so you are not banging the rev limiter and to realize the full potential. I would recommend a pump wedge also.

  3. #3

    Join Date
    Jul 2006
    Location
    Beaufort, SC
    Posts
    592
    which prop would i want. 3 blade, 4 blade? 15/19r? 15/20? i dont think im going to put a computer in it or anything possible injectors and a wheel in a year or so but maybe....

  4. #4
    Moderator The Bandit's Avatar
    Join Date
    Jul 2006
    Location
    Wilmette, IL
    Posts
    8,373
    You could go with either one of those...15-19r seems to be the hot ticket

  5. #5

    Join Date
    Jul 2006
    Location
    Beaufort, SC
    Posts
    592
    and thats not pitched out the box... i think i could easly screw things up there.
    sounds like ill start on the opas and exhaust in a week or 2... then prop and intercooler.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Some fun with my Go Pro camera this summer
    By rx4pain in forum 4-Tec Performance
    Replies: 1
    Last Post: 11-15-2010, 05:59 PM
  2. Need advice with mods
    By skyline2962 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 03-10-2010, 09:59 PM
  3. Mods: In what order for a RXT
    By bruinsrme in forum 4-Tec Performance
    Replies: 3
    Last Post: 09-03-2007, 03:25 PM
  4. GPR1200 mod advice
    By izz0 in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 08-17-2007, 06:47 AM
  5. Im sick of this, and im done with it..
    By waverider in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-24-2006, 11:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •