Results 1 to 5 of 5
  1. #1
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69

    CMD pump accel ??????

    How does the pump accel works on the CMD?? I'm haven't been able to get rid of a Bog down when i stab the throttle, my AFR is going to the 15s when i stab the throttle. It doesn't matter if im at idle or any RPM below 6000K. Example im riding at 3500rpm and as soon i stab the throttle my AFR goes to almost 15 at the same time the ski bogs down then it wakes up and go, everything happens very quickly. I have a Vtech tuning set at 9200rpm im trying to fix this using the CMD. Any help will be much appreciated.

    Thanks
    Last edited by tocullo; 10-20-2013 at 10:35 PM.


  2. #2
    Increase the fuel corrections from 1800 RPM and 90 KPA to 5000 RPM and 200 KPA about 8% at a time until the bog goes away. This stuff all happens in about .6 sec so even with a logger, it is tough to see.

    Andy

  3. #3
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by whittlebeast View Post
    Increase the fuel corrections from 1800 RPM and 90 KPA to 5000 RPM and 200 KPA about 8% at a time until the bog goes away. This stuff all happens in about .6 sec so even with a logger, it is tough to see.

    Andy
    Andy, where should I do this adjustments?? I though that it wasn't a good idea having targets at idle on the table?

  4. #4
    1800 RPM and 90 KPA to 5000 RPM and 200 KPA is a box and nowhere near idle. The AFR target table is different.

    Andy

  5. #5
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by whittlebeast View Post
    1800 RPM and 90 KPA to 5000 RPM and 200 KPA is a box and nowhere near idle. The AFR target table is different.

    Andy
    Ok, but where do I do this adjustments on the CMD?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Accel. Pumps Bypass
    By superramjet in forum Yamaha Open Discussion
    Replies: 14
    Last Post: 01-08-2009, 09:29 PM
  2. 1 40mm Kehin carb w/accel pump
    By PolarisNut in forum Polaris Open Discussion
    Replies: 1
    Last Post: 09-15-2007, 09:33 PM
  3. Accel Pump Delete Question
    By snowrunner in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 05-29-2007, 09:04 AM
  4. Sticky accel pump on GPR...common???
    By orion in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 07-18-2006, 08:16 AM
  5. Why disconnect and remove the Accel. Pump on the GPR?
    By carbuff91 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 07-16-2006, 12:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •