11-07-2013, 04:06 PM #1
80lb or 100lb injector options out there????
What are the options for this two types of injectors? Any expirience with either one? What brand ,model, ect?
11-07-2013, 04:19 PM #2
I have had no issues at all with the vt11 injectors that Jerry sells.
11-07-2013, 04:35 PM #3
ID1000'S are also good. They are also in the online store. Lots of people have been using them for a long time now with no issues. Depends on your ski you may need adapters to connect whatever type injectors you pick.
11-07-2013, 04:45 PM #4
Do this two fit with the Siemens ecu?? Is there any less expensive options?
11-07-2013, 04:47 PM #5
11-07-2013, 05:31 PM #6
Tocullo, here are your options as far as big injectors go (for Siemens ECU based skis) 80 lb injectors http://www.4-tecperformance.com/inde...roducts_id=514 1000cc injectors (this is your best choice) http://www.4-tecperformance.com/inde...oducts_id=1312 Hope that helps! Jerry
11-07-2013, 06:01 PM #7
Siemems skis use injectors with the ev1 connector 74mm long
what is more important is what your ecu is mapped for
the farther they are from the map the more tuning is required to make them work correctly
the v1100s look to me like bosch ext tip 950cc/90lb injectors with ev1 connectors
I would bet the ID1000s are bigger than the v1100s
IMO the bosch ext tip injector is the best for our app
it is the only injector used in new skidoos
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ercBOOSTED in forum Yamaha PWC Performance (4-stroke)Replies: 16Last Post: 08-08-2009, 10:03 PM
By Pale Rider in forum Sea Doo Open DiscussionReplies: 9Last Post: 08-17-2006, 03:54 PM
By Water4fire in forum Sea Doo Open DiscussionReplies: 4Last Post: 03-04-2006, 03:05 AM
By WFO in forum Yamaha Open DiscussionReplies: 3Last Post: 02-09-2006, 04:57 PM
By rx4pain in forum 4-Tec PerformanceReplies: 14Last Post: 07-01-2005, 12:01 PM