Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,132
    +1
    821

    *** COMPLETE R&D RACING PUMP FOR FZR/FZS - Multiple impellers!! ***

    SOLD

    Decided to set my ski up for recreational riding so I am selling my R&D 14 vein 160mm pump for the FZR/FZS, part number 132-22000 with about 15 hours or less of fresh water use on everything. New this setup is $3,500 + shipping with the single impeller! Yes, I am detailed, I just like folks to know what they are getting.

    Willing to mix and match to make someone a deal. Send me a PM and we can work out the details.
    If you don't need the Riva liner discount $300 from pump price.


    Option 1 $2,500 shipped for the following.

    • R&D 14 vein Racing 160mm Pump
    • Single 3 blade 160mm.
    • Tail cone with 3 spacers
    • Riva 160mm liner
    • Longer drive shaft for this set back setup. The previous owner could not get the prop tool off and nicked the drive shaft in a couple of spots while trying to cut the tool off. He sent it to Skat and they removed it and cleaned it up. They told him this will not cause any problems. You can see this in the last picture.
    Option 2 $2,800 shipped for the following.
    • R&D 14 vein Racing 160mm Pump
    • Skat twin impeller. Impeller was just setup by Skat Trak and only run at last races. Pics are in post 17 below. Top speed with this impeller was 88.6 mph.
    • Tail cone with 3 spacers
    • Riva 160mm liner
    • Longer drive shaft for this set back setup. The previous owner could not get the prop tool off and nicked the drive shaft in a couple of spots while trying to cut the tool off. He sent it to Skat and they removed it and cleaned it up. They told him this will not cause any problems. You can see this in the last picture.
    Single 160mm impellers. These have the big 83mm hub made for this pump, but they can be used on stock pump and 160mm liner.
    • SOLD 4 blade Skat. $200 shipped. Ran this at round 3 drags and top speed run of 88.9mph at 9260 RPM.
    • SOLD 3 blade Skat. $200 shipped. Great for big boost ski or turbo. I turned it 8,000 RPM and 83.4mph.
    • 3 blade Skat pitched by Jim. $200 shipped.

    Info on the pump.


    R&D Pro Series 160mm 14 Vein Stainless Steel Racing Pump Kit

    R&D has developed “The Ultimate Racing Pump” for the Big Powered Yamaha’s. When it comes to racing pumps for the Yamaha, it absolutely does not get any better. This new R&D 14 Vein Racing Pump System will tame up to 500 H.P. engine packages with NO PROBLEMS! The Pump utilizes a 160mm impellor O.D., while upsizing the internal hub to 83mm. The Pump System assembly also uses and extended driveshaft set up which will relocate the vein section creating a shorter stator vein section. Shorter stator vein sections with large hubs also referred to as a axial flow design will build big pressure which will add to greater pump thrusts over conventional mixed flow pump systems. The new R&D design does it right, and the way a Race Pump should be! The R&D Race Pump works seamless with existing R&D 160mm Single Stage or Twin Prop Impeller set ups. Prop sold separately. Simply put, there is no better pump system available.

    • Produces maximum thrusts, eliminates internal pump cavitation
    • Significantly increases pump load and hook up over any other pump design
    • Increases acceleration performance
    • Higher top speed averages
    • Works great with stock reduction nozzles, or R&D Pro Nozzles
    • Works great with R&D Adjustable Pump Cone Assemblies

    Pt# 132-22000
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20131013_134844.jpg 
Views:	204 
Size:	67.9 KB 
ID:	318485   Click image for larger version. 

Name:	20131013_134854.jpg 
Views:	176 
Size:	71.4 KB 
ID:	318486   Click image for larger version. 

Name:	20131013_134903.jpg 
Views:	122 
Size:	74.4 KB 
ID:	318487   Click image for larger version. 

Name:	20131013_134920.jpg 
Views:	230 
Size:	83.5 KB 
ID:	318488   Click image for larger version. 

Name:	20131013_140652.jpg 
Views:	154 
Size:	78.5 KB 
ID:	318489  
    Last edited by Gus13letter; 05-19-2014 at 08:52 AM.


  2. #2
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,132
    +1
    821
    Pic of the 4 blade.
    Pump is ready for shipment.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20131013_141041.jpg 
Views:	73 
Size:	108.1 KB 
ID:	318494   Click image for larger version. 

Name:	20130923_172742.jpg 
Views:	92 
Size:	50.3 KB 
ID:	318496  
    Last edited by Gus13letter; 11-14-2013 at 09:33 PM.

  3. #3
    Banned User
    Join Date
    May 2006
    Posts
    1,329
    +1
    152
    so are you all done with the draq racing?

  4. #4
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,132
    +1
    821
    Quote Originally Posted by Rocketman View Post
    so are you all done with the draq racing?
    As unfortunate as it is, I am done for now. I will certainly miss it, but I just cannot continue to spend thousands to get to where I want to be. Maybe after a while I can get back into it, but for now I just want to try and recover some of the money I have spent.

  5. #5
    Banned User
    Join Date
    May 2006
    Posts
    1,329
    +1
    152
    completely understand

  6. #6
    YAMAHA POWAAAA !!!!! 1_Fast_SHO's Avatar
    Join Date
    Apr 2010
    Location
    Houston, Texas
    Posts
    3,142
    +1
    255
    Going back to ride with SOFLA RIDERS gus ?

  7. #7
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Quote Originally Posted by Gus13letter View Post
    Quote Originally Posted by Rocketman View Post
    so are you all done with the draq racing?
    As unfortunate as it is, I am done for now. I will certainly miss it, but I just cannot continue to spend thousands to get to where I want to be. Maybe after a while I can get back into it, but for now I just want to try and recover some of the money I have spent.

    You have gotten faster than most will ever be... with Less and kept a smile on Your face You should be Proud.. There's nothing wrong with getting some funds back Money don't Grow on trees plus the new 2014 FZR Your Getting will make you feel Better

  8. #8
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,132
    +1
    821
    Quote Originally Posted by 1_Fast_SHO View Post
    Going back to ride with SOFLA RIDERS gus ?
    Yeah, hopefully I will catch more rides with them in the future. Great group of folks!

    Quote Originally Posted by shrabber View Post
    Quote Originally Posted by Gus13letter View Post
    Quote Originally Posted by Rocketman View Post
    so are you all done with the draq racing?
    As unfortunate as it is, I am done for now. I will certainly miss it, but I just cannot continue to spend thousands to get to where I want to be. Maybe after a while I can get back into it, but for now I just want to try and recover some of the money I have spent.

    You have gotten faster than most will ever be... with Less and kept a smile on Your face You should be Proud.. There's nothing wrong with getting some funds back Money don't Grow on trees plus the new 2014 FZR Your Getting will make you feel Better
    Thanks! Yes, I was definitely making progress over the last couple of months! I was running my best speeds with this setup and with a twin. Last weekend I really had a smile on my face. Who knows, if it doesn't sell, then I will continue to use it with a recreational ECU like the R3.
    I thought about the 2014, but no 2014 in my future. After thinking about it I realized my ski has everything I want. It is just time to get out and ride again!

  9. #9
    Banned User
    Join Date
    May 2006
    Posts
    1,329
    +1
    152
    You might as well just keep that pump and ride with your friends and then come race time ,,,hey hey hey still ready to go!!

  10. #10
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,132
    +1
    821
    Quote Originally Posted by Rocketman View Post
    You might as well just keep that pump and ride with your friends and then come race time ,,,hey hey hey still ready to go!!
    You know, that has come across my mind several times. I love being there in the action! But, if it sells it sells. If I stuck in it the plan was e85, more timing, and R2 cams....... See, there goes the $$$ as I speak...
    Maybe if I sell off all of my extra parts laying around that will make me feel better and I'll keep the pump...

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts wtb Riva Yamaha 160mm Race Pump for FZR
    By waseemyah in forum Yamaha Classifieds
    Replies: 1
    Last Post: 04-29-2013, 07:44 PM
  2. wtb Riva Yamaha 160mm Race Pump for FZR
    By waseemyah in forum Yamaha PWC Performance (4-stroke)
    Replies: 0
    Last Post: 04-26-2013, 02:50 PM
  3. WTB - Parts Skat-Trak 160mm 14vein pump for FZR
    By kenshin89 in forum Yamaha Classifieds
    Replies: 0
    Last Post: 07-28-2012, 07:01 PM
  4. FS Mechanical race trim system for FZR FZS GPR used for six hours
    By caliburst in forum Yamaha Classifieds
    Replies: 2
    Last Post: 04-13-2011, 12:54 PM
  5. 16 veine pump for fzr/sho
    By rxpdoo in forum Yamaha PWC Performance (4-stroke)
    Replies: 24
    Last Post: 01-06-2010, 05:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •