Thread: 200 Hour Service Items
11-15-2013, 12:43 PM #1
200 Hour Service Items
Have a 2008 STX-15F approaching 200 trouble free hours. Any suggestions on what should be looked at?
2 years ago at 140 +/- hours the valves clearances were checked by R-Rated Performance and were fine. Last year I had the fuel pump out and the strainer was clean and I replaced the fuel vent check valve which was blocked. I also cleaned the air filter flame arrester at that time.
Some item's I'm thinking are pump bearings, impeller inspection and clearance, throttle body shaft spring, and air suction valve.
I do the usual routine stuff like oil with filter, plugs with never-seize, fogging for winter storage, salt-away flush after non-fresh water rides, etc.
Any other ideas or something I'm missing?
11-16-2013, 08:43 PM #2
Tom, I would defintly pull the pump and check the bearings. if there's any water/rust in there change them out. Borrow Dave's prop tool I changed mine last year, was pretty easy. Bought the bearing on ebay for around $50 threw the bearing in the freezer and the pump in the oven with a home made bolt & washer combo pressed them right in.
11-21-2013, 09:46 AM #3
Ron, thanks for the help. I had R-Rated look at it. It appears I need bearings but unfortunately not pump bearings. I'll PM you after I pick it up Saturday.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Ryallen in forum Sea Doo How To & FAQsReplies: 4Last Post: 05-31-2013, 05:33 AM
By mxl16 in forum 4-Tec PerformanceReplies: 16Last Post: 05-09-2008, 04:13 PM
By reyes in forum 4-Tec PerformanceReplies: 10Last Post: 06-15-2007, 12:30 AM
By dgmoore in forum 4-Tec PerformanceReplies: 11Last Post: 06-09-2005, 08:44 AM
By Muddy River in forum 4-Tec PerformanceReplies: 1Last Post: 05-28-2005, 01:58 PM