Thread: Aeromotive or Walbro?
11-17-2013, 12:52 AM #1
Aeromotive or Walbro?
Time for me to upgrade the fuel pump. Aeromotive vs Walbro. Pros / Cons?
11-17-2013, 01:42 AM #2
I went with the Walbro it was a drop in and found it cheaper than the Aeromotive. I have it and the Riva RRFPR good combo and works great
11-17-2013, 02:04 AM #3
11-17-2013, 02:11 AM #4
With your mods.... a Walbro will be all you'll ever need. It's a direct drop in replacement, as stated earlier. Just be careful where you purchase it!
11-17-2013, 06:46 AM #5
Do a search, there are several threads about this topic. Both are NOT direct drop ins and require a little cutting on the housing on the newer S3/T3 skis. The Aeromotive kit in the store is very nice and $$, but draws more amps than the Walbro at any given AMP load, and should be installed with a relay. The Walbro works great, cost about $90 from Summit.
Go to Riva site and look at the directions for their Aeromotive kit, it explains what is required perfectly.
Several of us have been running a Walbro for years with great results.
Damn iPad is a pain when trying to do a search and post links, sorry!
Last edited by jpt7779; 11-17-2013 at 07:17 AM.
11-17-2013, 07:56 AM #6
Do a walbro... that's what im running.. but as stated be careful where you buy it... I got mine from slow_91
11-17-2013, 11:16 AM #7
Didn't know about the increased amp draw, that's good info. Walbro sounds like the ticket, but also wondering if anyone has experience with the HFP units?
11-17-2013, 05:02 PM #8
11-18-2013, 09:21 AM #9
11-18-2013, 09:56 AM #10
The Walbro has held up well, on my 05' Turbo at over 70psi fuel pressure with a RRFPR,for many years.
I run over 9K and 20psi boost with it now, If i get some Much needed larger injectors, I will be able to drop the fuel pressure down to around 43 psi
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)