Thread: rxp x 260 mods?
11-18-2013, 03:01 PM #1
- Join Date
- Dec 2007
rxp x 260 mods?
Hello just wondering what mods are the best for runabout beginners? just planning to do som mods this winter. I have a seadoo rxp x 260 rs.
11-18-2013, 04:00 PM #2
If your a beginner on a 260 I'd personally ride it for a couple years to learn the unit inside and out. These are very complex machines and screwing it up can cost some big $$$$
After a couple years you will know what to Dooo to it and the best way to Dooo it.
Congrats on a bad ASS ski!!!
Welcome aboard the Hulk!!!!
11-18-2013, 04:21 PM #3
air intake, prop and learn the machine as he stated.
11-18-2013, 04:55 PM #4
at 260 hp the mods to get to 300+ are not cheap
but you can get rid of all the limiters and that alone will give you a few mph
the best option to remove all the limiters on the stock ecu is to get the vtec (re-flash ecu)
it will also support a few more upgrades when your ready
11-18-2013, 05:09 PM #5
- Join Date
- May 2010
If I had to do it all again.... I'd do15/20R impeller, vtech tune/injectors, fuel regulator...DONE! .. ok maybe a Fizzle IC as well. Stock IC is crap. Tie Wrap your IC pipes about every 3 inches with big tie wraps...enhances throttle response. Save your money on the Intake unless your going big charger...just my opinion.
11-18-2013, 07:28 PM #6
11-19-2013, 06:19 AM #7
yeah but nobody puts light on the pitch of the props...
some speak of 15/20R (my experience is that you lose around 360 rpm with a 8,375 rpm reflash) others speak of 12.5 / 18.5 I could not test this because I have not found anyone that I repitched the prop : - #
11-19-2013, 07:51 AM #8
If you're losing an honest 360 on a 20 prop then get a 19 and up pitch.
11-19-2013, 08:33 AM #9
11-19-2013, 08:35 AM #10
Honestly a 15/20 and mod up since that will happen anyway. If someone is dead set on basic crap then 14/19+2 if a 20 prop is shy 350+ RPMs
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JAG in forum 4-Tec PerformanceReplies: 44Last Post: 12-24-2006, 08:30 PM
By BlaZinMJ in forum 4-Tec PerformanceReplies: 7Last Post: 08-12-2006, 09:16 PM
By buddydoo in forum 4-Tec PerformanceReplies: 6Last Post: 11-25-2005, 06:33 PM
By seadoo02xp in forum 4-Tec PerformanceReplies: 45Last Post: 07-12-2005, 10:00 PM
By Krazy-K in forum 4-Tec PerformanceReplies: 8Last Post: 06-21-2005, 05:10 PM