Results 1 to 2 of 2
  1. #1
    Nothin' runs like a Deere IowanGPR's Avatar
    Join Date
    Sep 2006
    Waterloo, IA

    Question E.F.I. help please.

    Just finished most of my modifications (listed later). I need to know what my E.F.I. settings should be. I have searched and read some disscussion on this but it seems every ski is different depending on moddifications, rider, and location. I have found that possibly 6,6,1,7 maybe my numbers?

    I am at about 990ft elevation, temp ranges from 65-100 (seasons) and most of the time that its hot it is humid also. I am looking for both holeshot and topspeed, but focussing on topspeed.

    My ski-
    2003 1300r
    FF plate
    13/19 solas concorde
    800 grate
    pro-tec reed stuffers
    Riva F/A
    D-plate, resistor mod
    waveeaters(irrellevent IMO)
    Riva EFI
    stepped stock sponsons

    I am 170 lbs, not sure if it matters.

    Any advice?

  2. #2
    Join Date
    Nov 2005
    6-6-1-7 The low and the mid is to high for the mods you have. I would set the low on 2 and the mid on 2 and leave the rest.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need HELP Please!
    By GeoRXT in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-30-2006, 08:04 AM
  2. HEy Guys Need Help PLEASE!!!
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-06-2006, 01:29 AM
  3. RXT 2005 Loose Hose - HELP PLEASE
    By BrAinZ in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-12-2006, 12:28 PM
  4. Can some one Post! A little Help Please!
    By Angelse68cal in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-04-2005, 07:57 PM
  5. RXP Handling !! Anyone help please
    By rxp_boy in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-17-2005, 02:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts