Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    Suthrn's Avatar
    Join Date
    Jul 2006
    Location
    Delaware
    Posts
    318

    Hello Mr. Jim...

    I sent you my plate this week and just wanted to make sure you got it and all is well. I have made it back from overseas and if you have any questions for me just let me know. I was also getting my impeller from you. Thanks.

    Chris


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Hello Chris, Everything is going fine. I saw that letter you wrote about being out of the country when you sent the plate, I did not leave you any message's so i don't bother you from your vacation. I will give you a ring tomorrow.

  3. #3
    Suthrn's Avatar
    Join Date
    Jul 2006
    Location
    Delaware
    Posts
    318
    Thanks for the update and call.

  4. #4
    MR. SCOVILLE UNIT SUCKMYWAKE's Avatar
    Join Date
    Aug 2005
    Location
    ASTON, PENNSYLVANIA
    Posts
    2,836
    +1
    8
    i helped chris install the jim's plate and with a little grinding(ok alot) of grinding, we got it to the ideal angle and clearance. the plate looked excellent, and i'm sure the gains will be just as sweet also installed the re-pitched dynafly, no problems at all. chris should be smokin soon!!!!!!!

  5. #5
    MR. SCOVILLE UNIT SUCKMYWAKE's Avatar
    Join Date
    Aug 2005
    Location
    ASTON, PENNSYLVANIA
    Posts
    2,836
    +1
    8
    i helped chris install the jim's plate and with a little grinding(ok alot) of grinding, we got it to the ideal angle and clearance. the plate looked excellent, and i'm sure the gains will be just as sweet also installed the re-pitched dynafly, no problems at all. chris should be smokin soon!!!!!!!

  6. #6
    MR. SCOVILLE UNIT SUCKMYWAKE's Avatar
    Join Date
    Aug 2005
    Location
    ASTON, PENNSYLVANIA
    Posts
    2,836
    +1
    8
    i helped chris install the jim's plate and with a little grinding(ok alot) of grinding, we got it to the ideal angle and clearance. the plate looked excellent, and i'm sure the gains will be just as sweet also installed the re-pitched dynafly, no problems at all. chris should be smokin soon!!!!!!!

  7. #7

    plate

    SMW did you grind on the inside of the plate at all or was it all on the pump housing/nozzle area?

  8. #8
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by SUCKMYWAKE View Post
    i helped chris install the jim's plate and with a little grinding(ok alot) of grinding, we got it to the ideal angle and clearance. the plate looked excellent, and i'm sure the gains will be just as sweet also installed the re-pitched dynafly, no problems at all. chris should be smokin soon!!!!!!!
    It's nice to have people like you in this sport Brian, Who are willing to give a member a helping hand.

  9. #9
    Suthrn's Avatar
    Join Date
    Jul 2006
    Location
    Delaware
    Posts
    318
    Thanks again Brian and Jim. I hope to test it out tomorrow if all goes well.

  10. #10
    r33pwrd's Avatar
    Join Date
    Mar 2006
    Location
    Sammamish Washington
    Posts
    4,216
    +1
    360
    Quote Originally Posted by NateGP1300R View Post
    SMW did you grind on the inside of the plate at all or was it all on the pump housing/nozzle area?
    Should be pump housing/nozzle area I would not grind off anymore material from the bottom of the plate (It may become week) I would assume that most do not grind excess on the bottom of the plate?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hello guys whats up
    By bling bling in forum 4-Tec Performance
    Replies: 30
    Last Post: 07-18-2013, 08:25 AM
  2. Hello everyone!
    By oneal in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 07-26-2005, 10:00 PM
  3. Hello World!
    By Hydrotoys in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 07-11-2005, 04:58 PM
  4. New Limited Owner Says Hello...
    By FUELISH in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-30-2005, 10:30 AM
  5. New Member - Hello
    By Texas4play in forum Sea Doo Open Discussion
    Replies: 11
    Last Post: 05-04-2005, 08:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •