Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 34
  1. #1
    kimi's Avatar
    Join Date
    Jan 2012
    Location
    Lithuania, Europe
    Posts
    268
    +1
    9

    2012 seadoo rxpr 260 motec M-130, EGT and knock sensor installation advice

    Hello, my friend have 2012 RXPX 260 and he has installed motec m-130, but he don't no how to install EGT and knock sensors? How can he do that? Thanks


  2. #2
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    It uses the stock knock sensor.

    And the egt sensor or sensors need to be purchased and wired in and setup in the tune.

  3. #3
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948
    You will need to install a jumper wire to be able to use knock control

  4. #4
    kimi's Avatar
    Join Date
    Jan 2012
    Location
    Lithuania, Europe
    Posts
    268
    +1
    9
    Quote Originally Posted by seadoo02xp View Post
    You will need to install a jumper wire to be able to use knock control
    Thanks for advise pal, but my friend thinks to sale this m-130, he wants to buy Igni power from J-Mark. (easyrider.lu)

  5. #5
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    You will need to install a jumper wire to be able to use knock control
    Thanks for advise pal, but my friend thinks to sale this m-130, he wants to buy Igni power from J-Mark. (easyrider.lu)
    Good luck with that

  6. #6
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    You will need to install a jumper wire to be able to use knock control
    Thanks for advise pal, but my friend thinks to sale this m-130, he wants to buy Igni power from J-Mark. (easyrider.lu)
    Be patient things don't just plug in and work. With the m130 you got the best ecu on the market sit back take a deep breath there's plenty of guys here that can assist You.

  7. #7
    kimi's Avatar
    Join Date
    Jan 2012
    Location
    Lithuania, Europe
    Posts
    268
    +1
    9
    Quote Originally Posted by seadoo02xp View Post
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    You will need to install a jumper wire to be able to use knock control
    Thanks for advise pal, but my friend thinks to sale this m-130, he wants to buy Igni power from J-Mark. (easyrider.lu)
    Good luck with that
    Thanks, he thinks that Igni power is easier to install. Don't you think he is right?

  8. #8
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    You will need to install a jumper wire to be able to use knock control
    Thanks for advise pal, but my friend thinks to sale this m-130, he wants to buy Igni power from J-Mark. (easyrider.lu)
    Good luck with that
    Thanks, he thinks that Igni power is easier to install. Don't you think he is right?
    Never played with igni power.
    But I love my Motec m130

  9. #9
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post
    You will need to install a jumper wire to be able to use knock control
    Thanks for advise pal, but my friend thinks to sale this m-130, he wants to buy Igni power from J-Mark. (easyrider.lu)
    Good luck with that
    Thanks, he thinks that Igni power is easier to install. Don't you think he is right?
    Easier to install?? Not sure but Motec is basically plug and play. If the knock control is not working it's either disabled or the jumper isn't installed both which are very simple to fix. Educate yourself before making any decision . It could be as simple as a disabled setting

  10. #10
    kimi's Avatar
    Join Date
    Jan 2012
    Location
    Lithuania, Europe
    Posts
    268
    +1
    9
    Quote Originally Posted by hotbird View Post
    Quote Originally Posted by kimi View Post
    Quote Originally Posted by seadoo02xp View Post

    Good luck with that
    Thanks, he thinks that Igni power is easier to install. Don't you think he is right?
    Never played with igni power.
    But I love my Motec m130
    The decision is not mine, a friend decided to sell motec and buy igni.
    Thanks for advises guys and Merry Christmas

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2012 seadoo rxpx 260 engine temps
    By Tucka in forum Open Discussion
    Replies: 4
    Last Post: 04-04-2014, 11:36 PM
  2. SOLD 2012 seadoo rpxp 260 custom show ski with mild mods
    By xpl2008 in forum Sea Doo 4Tec Skis
    Replies: 13
    Last Post: 04-06-2013, 04:30 PM
  3. Replies: 0
    Last Post: 02-21-2012, 10:23 PM
  4. Replies: 0
    Last Post: 02-21-2012, 10:03 PM
  5. 2012 seadoo rxt x 260 with boost indicator!!!
    By RXT X 260 RS in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 02-20-2012, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •