01-19-2014, 11:32 PM #1
2009 Sea-Doo WakePro 215 12V Hi Warning on LCD
I am getting a 12V HI warning on the LCD. Warning is coming up intermittently, but is increasing in frequency and the electrical system is completely dropping out for up to 2 seconds at a time. I have taken it into the dealership and they have checked the voltage regulator and stator. Both are fine. No error codes come up, and the dealership is stuck not knowing what to do.
01-20-2014, 12:00 AM #2
The regulators are known to have that issue.
Some times the regulators have hit or miss
problems till the crap out for good
In my opinion its the voltage regulator...
01-20-2014, 12:01 AM #3
Also check the wires hooked to the v/r and clean the contact points.
01-20-2014, 03:32 AM #4
- Join Date
- Jan 2014
Bad voltage regulator. Over charging the battery.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By wafer71 in forum 4-Tec PerformanceReplies: 3Last Post: 12-10-2013, 09:46 PM
By STEVE PWC in forum Sea Doo ClassifiedsReplies: 4Last Post: 02-08-2013, 08:06 PM
By sas in forum 4-Tec PerformanceReplies: 19Last Post: 07-17-2010, 05:12 PM
By vidbuster in forum 4-Tec PerformanceReplies: 90Last Post: 10-19-2008, 09:44 PM
By 12sMIGUEL in forum Sea Doo Open DiscussionReplies: 4Last Post: 08-18-2008, 11:43 AM