Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 57
  1. #1
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69

    Idle control valve??

    If the valve goes bad what are the common problems? Have any one deleted it before? Can it be done??


  2. #2
    Cant be deleted. Must be replaced.

    04-08 was steel cased later one were plastic.
    Part number supersedes.

  3. #3
    ncdoo's Avatar
    Join Date
    Nov 2007
    Location
    Eastern NC
    Posts
    1,351
    +1
    105
    If it goes bad, the ski will not idle properly.

  4. #4
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    With a motec they delete it and just set the idle screw but with a stock ecu it would throw codes if you unplug it. Also probably not idle like it should.

    If yours is going bad just clean or replace it.

  5. #5
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,992
    +1
    455
    Quote Originally Posted by hotbird View Post
    With a motec they delete it and just set the idle screw but with a stock ecu it would throw codes if you unplug it. Also probably not idle like it should.

    If yours is going bad just clean or replace it.
    Ahhh what? You sure?

  6. #6
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    Quote Originally Posted by Scott View Post
    Quote Originally Posted by hotbird View Post
    With a motec they delete it and just set the idle screw but with a stock ecu it would throw codes if you unplug it. Also probably not idle like it should.

    If yours is going bad just clean or replace it.
    Ahhh what? You sure?
    Ask tommygunner or read his siemens motec thread.

  7. #7
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by ncdoo View Post
    If it goes bad, the ski will not idle properly.
    Is that the only noticeable symptom? Can it cause some stumbling at launch??

  8. #8
    Bob 1tommygunner1927's Avatar
    Join Date
    Apr 2007
    Location
    Houston, Texas
    Posts
    6,362
    +1
    975
    Quote Originally Posted by hotbird View Post
    Quote Originally Posted by Scott View Post
    Quote Originally Posted by hotbird View Post
    With a motec they delete it and just set the idle screw but with a stock ecu it would throw codes if you unplug it. Also probably not idle like it should.

    If yours is going bad just clean or replace it.
    Ahhh what? You sure?
    Ask tommygunner or read his siemens motec thread.
    With MoTeC M130 the idle air control is eliminated.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	MoTeC install 004.jpg 
Views:	93 
Size:	75.8 KB 
ID:	321674  

  9. #9
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Your still fighting issues with your ski??? Man.... I'd like to see you finally get that thing running right!

  10. #10
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by 1tommygunner1927 View Post
    Quote Originally Posted by hotbird View Post
    Quote Originally Posted by Scott View Post
    Quote Originally Posted by hotbird View Post
    With a motec they delete it and just set the idle screw but with a stock ecu it would throw codes if you unplug it. Also probably not idle like it should.

    If yours is going bad just clean or replace it.
    Ahhh what? You sure?
    Ask tommygunner or read his siemens motec thread.
    With MoTeC M130 the idle air control is eliminated.

    Exactly!! Can it be done on a stock ECU?

Page 1 of 6 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts Seadoo Idle control valve (ICV)
    By Fosta in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 06-30-2015, 04:01 AM
  2. Idle control valve?
    By Fosta in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-29-2015, 08:09 PM
  3. Idle Control Valve?
    By Lucrative in forum Kawasaki PWC Performance (4-stroke)
    Replies: 13
    Last Post: 05-22-2015, 03:08 PM
  4. Idle control valve Ultra 300
    By RXP-X 2011 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 2
    Last Post: 10-08-2014, 10:26 PM
  5. WTB - Parts WTB: 4tec idle control valve and RXT glove box door
    By jimmyducati in forum Sea Doo Classifieds
    Replies: 4
    Last Post: 07-04-2014, 02:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •