Results 1 to 4 of 4
  1. #1

    Greetings to all....New to site.

    Just did a crank-up rebuild on a 'skatterd" 1200pv engine. All seems good, but the reed petels seem somewhat soft/loose. should they be tight against the reed body/cage or soft on there opening, stock reed petels......

  2. #2
    wotxxxsd's Avatar
    Join Date
    May 2012
    Welcome aboard the Hulk!!

  3. #3
    Bryan's Avatar
    Join Date
    Jan 2013
    Welcome and someone correct me if I'm wrong but I'm pretty sure you want the reed petals to be tight against the reed block to seal off the intake tract.

  4. +1 by:

  5. #4
    CJ's gpr's Avatar
    Join Date
    Aug 2012
    Long Island
    A slight opening shows they're worn. Mine still ran fine with the reeds slightly worn but while doing a rebuild why not do it right and replace all parts in need of replacement. Ive learned the hard way, don't slack off during a rebuild.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Greetings to all from a new owner of a SEADOO from Greece!
    By oikonomoupetros in forum Open Discussion
    Replies: 6
    Last Post: 03-10-2012, 04:24 AM
  2. Hello to all !! New guy
    By MIARider in forum Sea Doo Open Discussion
    Replies: 23
    Last Post: 08-10-2007, 08:31 AM
  3. New to site
    By Tonic in forum 2-Stroke Performance
    Replies: 5
    Last Post: 12-13-2006, 06:07 AM
  4. Hello, New to site
    By Spike in forum Sea Doo Open Discussion
    Replies: 13
    Last Post: 10-25-2006, 09:36 PM
  5. Hi all, New to the forum, all the way from UK
    By Mark-UK in forum Polaris Open Discussion
    Replies: 3
    Last Post: 09-21-2006, 10:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts