Results 1 to 4 of 4
  1. #1

    2003 GP800R Compression numbers input please

    Just finished a rebuild with boudin.

    Here are the compression and speed numbers. Please chime in if these numbers are good.

    Ski warmed up for 15 minutes on the lake, 45 degrees outside, 135' above sea level.

    Both plugs out and a freshly charged new battery, throttle squeezed wide open. Stock setup with oil pump. Fresh gas.

    139 psi even on both cylinders.
    52mph on GPS
    Great hole shot, mid throttle and high end sound. No hesitations through the rpm range but did not have a digital tach to see rpms.

    Plugs looked pretty too.

  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Houston, Texas
    all sounds good

  3. #3
    OzarkYamMonster's Avatar
    Join Date
    Oct 2012
    Lake Of The Ozarks
    Souds like you did an outstanding job ... the numbers are very good. Good Luck, be safe & most of all have a shit load of fun!

  4. #4

    Join Date
    Sep 2006
    Houston Texas
    rebuilt my 2001 GPR 800 new pistons and fresh plated bores , readings same as you 140 and 52

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2007 FXHO compression numbers input please
    By macGruber in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 02-18-2014, 12:49 AM
  2. Replies: 44
    Last Post: 09-05-2013, 09:15 AM
  3. chk out these compression numbers for the kawi
    By dav_dman in forum Honda Open Discussion
    Replies: 0
    Last Post: 07-02-2007, 08:47 AM
  4. Everyone input please 03' - '07 GP1300R's
    By GP1300R powerhouse in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-20-2007, 09:57 PM
  5. Need Input!!! PLease!! Seat On vs Off
    By WannabeGoing80 in forum 4-Tec Performance
    Replies: 11
    Last Post: 05-19-2007, 08:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts