03-07-2014, 06:18 PM #1
- Join Date
- Jan 2014
Jet Pump Nozzle Steering + Reverse Gate Complete 2008 rxt x
Anyone know where I can get a used Jet Pump Nozzle Steering + Reverse Gate Complete? I found one on ebay for a 2004 GTX supercharged and although it looks like exactly what I need the part numbers listed on ebay don't match. Anyone know if that would fit my 2008 rxt x? I attached a pic of the one on ebay.
03-07-2014, 09:02 PM #2
Your rxtx will have a larger nozzle, and perhaps vts? The gtx has a smaller nozzle and no trim.
03-07-2014, 10:36 PM #3
03-07-2014, 10:42 PM #4
That pump assembly does not have the VTS trim ring. It won't work on your 2008 RXTX.
It will install on your ski but you won't have use of the VTS.....however, at the bottom of the reduction nozzle it should have a milled or flat area. If it doesn't have this milled or flat area it may not clear the ride plate. To provide clearance mill it flat or use a wedge.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tchies in forum Yamaha ClassifiedsReplies: 3Last Post: 02-07-2014, 04:11 PM
By K447 in forum Polaris ClassifiedsReplies: 1Last Post: 10-17-2013, 06:33 PM
By VenomRXP in forum Sea Doo 4Tec SkisReplies: 5Last Post: 06-03-2013, 10:09 PM
By RXPSTUNNA in forum Sea Doo ClassifiedsReplies: 9Last Post: 10-14-2010, 01:58 PM
By Chrisrokc in forum Yamaha ClassifiedsReplies: 0Last Post: 09-11-2010, 01:39 AM