Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4

    WTS:Parting out1999 Slth with updated electronics

    I'm parting out my 99 Slth. The hull was more than I wanted to fix at the moment.
    Everything is in really good condition, but it was a saltwater ski so there is corrosion on some of the metal parts.
    The electronics are in amazing shape, and the display was functioning when I pulled the hood off.
    I have a ocean pro ride plate and worx sponsons for it also.
    I pulled the rear cylinder off after the compression read 98psi, seemed to be running lean and the carb proved my suspicion. The cylinder is clean with no gouges, and a home will clean her up. The front cylinder tested at 130 and looks good internally.
    I have every single part for this ski already sorted and organized into boxes above my garage now.... Had to make room for a 2000 seadoo rx 951di that needs a motor...
    I would be willing to trade straight up for seadoo parts, or sell these.
    I use paypal, and am located in swfl.... Ft myers/Cape coral area... But for the right price, I look for any excuse to take a road trip...
    Let me know if there is anything you may need and we can work out a very reasonable price.


    I will post more pictures tomorrow of everything, and if you want any specific pictures or info please feel free to ask me.


  2. #2
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4
    Nothing? I probably won't refuse any offer at the moment.
    I would prefer not to split up the electrical system at the moment. Holding out for someone that needs the entire update kit.

  3. #3
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4

    WTS:Parting out1999 Slth with updated electronics

    Is anyone interested in the motor? Short block or complete? I could possibly do the topend and sell, or allow someone to rebuild it theirselves for less money.... Playing with it now, crank is in excellent shape, and front cylinder looks good, back needs hone and piston.

    Front piston >

    I would do $300 as is plus shipping, or $600 rebuilt plus shipping, and those prices include non-rebuilt carbs ( will need a rebuild), intake manifold, reed cages, pto.... But no stator.

  4. #4
    Miglater's Avatar
    Join Date
    Apr 2013
    Location
    Howell, MI
    Posts
    424
    +1
    25
    PM sent

  5. #5

    Join Date
    Mar 2014
    Location
    Eastern Oregon
    Posts
    7
    PM sent

  6. #6
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4
    Pm's returned with pictures to those who needed some.
    Does anyone need the extended pump housing? Stator has cavitation damage , impellor has some dings, steering and reverse parts are in good shape. I have the steering and reverse cables.
    The only thing that was busted up body related was the glove box hinge. Everything else was in good shape.

  7. #7
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4
    Worx sponsons Sold!

  8. #8
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4

    WTS:Parting out1999 Slth with updated electronics

    Friday sale!!?? Lol
    Ocean pro ride plate- $40+ shipping
    Entire front hood in great shape with MFD still attached - $200+ shipping
    If none of this sells, when money permits I will be building a Jet Jon
    MFD- $130shipped

    Entire electrical system from MFD to bilge pump $500
    Without MFD- $400
    Just cdi, stator and coils $350
    All prices are shipped except front hood.
    Buyers covers PayPal fees.
    Last edited by BleedingOrange36; 03-21-2014 at 08:24 PM.

  9. #9
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4
    Electronics sold, still have the mfd.
    Anyone need any brackets, bolts, body pieces, seat base?
    Let me know, I believe this ski has run it's course and the rest of the items aren't worth much to me....
    I will sell the shortblock for $250+shipping and paypal fees. It does not have the flywheel housing anymore.

  10. #10
    Rippin Ron BleedingOrange36's Avatar
    Join Date
    Feb 2014
    Location
    SWFL
    Posts
    67
    +1
    4
    Mfd- $125 shipped
    Ride plate - $25+shipping
    95hp 700cc shortblock- $250+shipping

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1998 SLTH with new ignition update kit, revs limited to 4000
    By martywright15 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 07-23-2016, 06:57 PM
  2. SOLD Parting out GPRXP with 2004 rxp motor and electronics
    By rangermtb5 in forum Sea Doo Classifieds
    Replies: 26
    Last Post: 01-16-2015, 10:52 AM
  3. Need a part--and help with Jetworks mod
    By cj1058 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 08-06-2007, 08:22 AM
  4. Need a part--and help with Jetworks mod
    By cj1058 in forum Yamaha Old School Skis
    Replies: 3
    Last Post: 08-05-2007, 11:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •