03-14-2014, 01:13 PM #1
Fizzle F1000 Intercooler as OEM 255 260 replacement
I now have a kit that replaces the stock Sea Doo intercooler with my Fizzle F1000 Intercooler. This intercooler kit features the Fizzle F1000 Sea Doo Intercooler, along with 2 pipes, 4 silicone hoses, 8 clamps, and 2 brass fittings. It allows you use the Fizzle Intercooler in the stock location with stock or aftermarket exhaust. This serves as a replacement upgrade for T3 and S3 hull Sea Doo watercraft (255/260 HP) that come equipped with an external intercooler. The F1000 Intercooler gives gains in all around performance, including increased peak speed and peak RPMs, over all stock Seadoo intercoolers. Typical gains are approximately 100+ RPM over Sea Doo OEM 255 and 260 intercoolers. One of the main benefits is drastically reduced heat fade compared to the Sea Doo stock intercooler.
This will fit all S3 and T3 Seadoo hulls. That includes the 2012, 2013, 2014 RXP-X 260, all RXT/RXT-X/RXT IS 260s, GTX 260s, GTX IS 255, RXT IS 255. etc. What it will not fit is the 2008-2011 RXP-X 255 and the 2008-2009 RXT-X 255.
Last edited by JFizzleJR; 07-21-2014 at 11:50 AM.
03-14-2014, 02:12 PM #2
Here is what the complete kit looks like. $599 + shipping. Stock location and improved performance on all T3 and S3 (255/260 HP) Seadoos!
Last edited by JFizzleJR; 07-21-2014 at 11:51 AM.
03-14-2014, 03:04 PM #3
these pics are in a RXT right? is it different for RXP-X?
03-14-2014, 07:25 PM #4
03-14-2014, 10:25 PM #5
599.00 you get the best available performance intercooler out in the market. As most know buy a seadoo wait and your stock intercooler will leak, not to mention it won't even perform half as well as a fizzle. The cost difference in buying a replacement seadoo intercooler and a fizzle is nothing but the performance and durability is everything
03-15-2014, 01:06 AM #6
- Join Date
- May 2013
Now it's become very interesting and a no brainer when swaping out the OEM crap. Well done.
Just one thing, will the existing water OEM IN/OUT lines fit? or will they need replacing? Existing connections are on the port side.
03-15-2014, 01:17 AM #7
Your lines should be fine, just changing your stock intercooler with the fizzle should gain you 150-200 rpm. Man I love Your avatar lol I grew up with a Honda 110 lol
03-15-2014, 06:47 AM #8
Awesome, put in the store please !!
03-15-2014, 09:15 AM #9
Last edited by JFizzleJR; 03-15-2014 at 09:43 AM.
03-15-2014, 09:22 AM #10
Here is the piping setup adapted to the GTX iS 260. It's hard to see what's going on in the busy engine compartment but the F1000 is perched back there in the stock location!
EDIT: updated first post with pictures of new hard pipe kit
Last edited by JFizzleJR; 07-21-2014 at 11:52 AM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Green Hulk in forum 4-Tec PerformanceReplies: 109Last Post: 03-04-2014, 11:57 PM
By mhagley in forum Yamaha PWC Performance (4-stroke)Replies: 4Last Post: 01-08-2014, 05:40 PM
By egor in forum 4-Tec PerformanceReplies: 7Last Post: 08-17-2013, 07:23 AM
By skigolfnut in forum 4-Tec PerformanceReplies: 4Last Post: 10-16-2011, 07:30 PM
By KawieGuy in forum Kawasaki ClassifiedsReplies: 1Last Post: 11-21-2010, 11:49 PM