Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
  1. #1

    Join Date
    May 2011
    Location
    Newcastle Australia
    Posts
    72
    +1
    1

    260 rxpx Ideling at 3000 rpm

    Hi guys,

    my mates 260 px started holding idle around 3k

    when you first kick it over it idles at 1700 like normal if you give it a few small dabs of the throttle it will return to 1700 but if you rev it over 3k for a few seconds it will only come back to around 3000rpm and holds idle.

    turning it off then back on brings the revs back to 1700 and it all starts again,

    throttle body looks good and can't find a vacuum leak. He will pull the throttle body and clean it over the weekend but looks fine as is,

    any idea? Ski is 100% stock

    cheers


  2. #2
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    Throttle body playing up or needs to be reset ...

  3. #3

    Join Date
    Jun 2005
    Location
    rome ga
    Posts
    938
    +1
    20
    air leak intake manifold ?

  4. #4
    imp0ster's Avatar
    Join Date
    Dec 2011
    Location
    Palm Harbor, FL
    Posts
    5,037
    +1
    672
    Idle air valve

  5. #5
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,991
    +1
    455
    Quote Originally Posted by imp0ster View Post
    Idle air valve
    No bueno on iControl

  6. +1 by:


  7. #6
    The 260 models does not have idle air valve/bypass valve the ITC make all the work by changing the throtle angle.
    I had an issue with one ski:the needle bearing in the throtle body was stuck.
    Hours on this ski?!

  8. #7

    Join Date
    May 2011
    Location
    Newcastle Australia
    Posts
    72
    +1
    1
    Thanks for the input
    we will pull the throttle on the weekend and have a closer look for any vacuum leaks
    ski has 21 hours and just hit one year old

  9. #8
    Pete1027's Avatar
    Join Date
    Jul 2012
    Location
    Adelaide, AUSTRALIA
    Posts
    474
    +1
    15
    Try swapping the brake and throttle actuators on the handle bars around and see if this makes a difference.

  10. #9
    Just thinking?!the handlebar/sterring ....if you turn right or left the OTAS will actuate and will increase rpm to help the ski to turn right or left easyear.what's the position of the stering when you have this high idelling?!

  11. #10

    Join Date
    Sep 2010
    Location
    South Florida
    Posts
    1,599
    +1
    123
    Quote Originally Posted by Scott View Post
    Quote Originally Posted by imp0ster View Post
    Idle air valve
    No bueno on iControl
    I new you were part Puerto Rican?

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rxpx 260 only doing 50 at full rpm and boost
    By superman5397 in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-07-2016, 12:21 PM
  2. 99 GTX gauges flash and Ski dies at 3000 RPM
    By GarageDetailer in forum 2-Stroke Performance
    Replies: 4
    Last Post: 08-20-2011, 08:33 PM
  3. Yamaha FX SHO litle vibration and noise at 3000-4000 rpm
    By paul18187 in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 08-12-2010, 11:32 PM
  4. 94 Seadoo XP Bogging down at 3000 rpm
    By mr3arnest in forum 2-Stroke Performance
    Replies: 1
    Last Post: 07-10-2010, 02:14 PM
  5. Why is my ski hanging at 3000 rpm?
    By zxiripper in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 07-31-2009, 08:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •